Acceptance Mark


(Your shopping cart is empty)
You are here: Home > Mustang > 2015-2017 MUSTANG PARTS > 3.7L V6 > Drivetrain > Differential
Sort By
Page of 1
M-4204-M 2015-2019 MUSTANG 8.8-INCH DIFFERENTIAL 2015-2016 MUSTANG REAR DIFFERENTIAL TO SUBFRAME BUSHING KIT -- M-4425-M
List Price:$210.00
Our Price:$190.00
You save $20.00!
more info
List Price:$459.00
Our Price:$399.00
You save $60.00!
more info
M-4204-M 2015-2019 MUSTANG 8.8-INCH DIFFERENTIAL 2015-2016 MUSTANG REAR DIFFERENTIAL TO SUBFRAME BUSHING KIT -- M-4425-M

2015-2019 MUSTANG 8.8-INCH DIFFERENTIAL

M-4204-M

  • Fits 2015-2019 Mustang GT, V6 and I4 with 3.31, 3.55, 3.73, and 4.09 ratio gears only
  • Traction-Lok 8.8-inch differential
  • Fits 34-spline axles
  • Requires 4-ounces of CM-19546-A1 friction modifier with initial fill
  • For use with M-4209-88355A and M-4209-88373A Super 8.8" Gear Sets
  • Use differential install kit M-4210-B3

2015-2016 MUSTANG REAR DIFFERENTIAL TO SUBFRAME BUSHING KIT

M-4425-M

  • Fits all 2015-2016 Mustangs
  • Includes 4 aluminum bushing halves and 2 aluminum, steel and Delrin bushings
  • Replaces factory rubber mounts between sub frame and differential housing
  • Eliminates differential bushing compliance under vehicle loads
  • Reduces wheel hop
  • Recommended for use with M-5872-M, 2015 Mustang Rear Sub Frame To Body Bushing Kit
  • Component of M-5035-M 2015 Mustang Rear Sub Frame With Performance Bushings
  • Suggested for use with Half Shaft Upgrade Kit M-4130-M
  • Off-road use only
NOTE: will transmit additional drivetrain noise to interior of vehicle
FORD RACING 2015-2017 MUSTANG GT TORSEN DIFFERENTIAL -- M4204-MT 2018-2022 MUSTANG IRS LOADED DIFFERENTIAL HOUSING 3.55 -- M-4001-88355B
List Price:$900.00
Our Price:$790.00
You save $110.00!
more info
Our Price:$1,225.00

(2)
more info
FORD RACING 2015-2017 MUSTANG GT TORSEN DIFFERENTIAL -- M4204-MT 2018-2022 MUSTANG IRS LOADED DIFFERENTIAL HOUSING 3.55  -- M-4001-88355B
  • Fits 2015-2017 Mustang GT, V6 and I4 with 3.31, 3.55 and 3.73 ratio gears only
  • Standard on 2015-2017 Mustang GT Performance Pack
  • Fits 34-spline axles
  • Torsen(R) T2R type differential
  • Features full-time torque-sensing,torque-biasing

2018-2022 MUSTANG IRS LOADED DIFFERENTIAL HOUSING 3.55

M-4001-88355B

  • Loaded differential housing for 2018-2022 Mustang
  • Fits 2015-2017 Mustang (see technical notes below)
  • Original Equipment on 2019 Mustang GT
  • Iron housing with aluminum cover
  • Includes 3.55:1 ratio gear set M-4209-88355A and Traction-Lok differential M-4204-M
  • Custom calibration required for speedometer and shift corrections
  • Note-on 2015-2017 Mustang, pinion flange change may be necessary; comes with pinion flange with 93mm bolt circle and 110mm driveshaft pilot installed. For applications that require 95mm bolt circle and 113mm driveshaft pilot, use FR3Z-4851-B pinion flange, available through Ford dealer.
   
 
Ford Racing By Speedshop Direct.com
A Subsidiary of
Autocars/Speedshop Direct

3212 El Camino Real Atascadero, CA 93422
 About Us
 Privacy Policy
 Send Us Feedback