Acceptance Mark


(Your shopping cart is empty)

  Home > Engine Components > Engine Blocks >

FORD RACING BOSS 351 CYLINDER BLOCK 9.5 INCH DECK HEIGHT -- M-6010-BOSS35195


FORD RACING BOSS 351 CYLINDER BLOCK 9.5 INCH DECK HEIGHT -- M-6010-BOSS35195


 
Our Price:$4,250.00

Quantity in Stock:(Out of Stock)


Availability : Usually Ships in 24 to 48 Hours
Part Number: M-6010-BOSS35195
Qty:

  
Description
 
     The legend is reborn with this all new 351 block!  Stronger than the original!  
  • 4.125" bore capacity (sonic check recommended), finished at 3.990" to 3.995" rough bore  
  • 9.5" deck height, finished at 9.500" plus .010" to .015"  
  • Maximum recommended stroke 4.250", clearance dependent on crankshaft/connecting rod manufacturer  
  • Splayed 4-bolt main on 2, 3, 4, main caps  
  • 2-bolt main on 1 and 5 main caps  
  • Main bearing bores finished to low limit  
  • 2.749" main journal diameter (stock 351C size)  
  • Finished lifter bores  
  • Machined to accept factory roller lifter guides and lifter guide retainer  
  • Revised oiling and cooling system passageways  
  • Siamese bore with drilled coolant crossover  
  • Increased bulkhead material  
  • Threaded core and galley plugs (straight thread port plugs with O-ring)  
  • Requires special length 1/2" head bolts M-6065-BOSS or head studs M-6014-BOSS recommended with M-6049-X306/307/Z304DA heads  
  • Designed
    for M-6049-X306//X307/C3/D3/Z304DA cylinder heads. Not designed for
    production 302/351W or M-6049-Y302/Y303/X302/X303/X304/X305 cylinder
    heads  
  • Uses common OD cam bearings M-6261-J351/R351  
  • Unique cam plug M-6026-S351 included  
  • M-6051-S331 or M-6051-CP331 head gasket recommended  
  • Weighs approximately 205 lbs.  
  • Great price and value  
  • The foundation for 9.5" deck projects
In
the April 2010 issue of Circle Track Magazine, the editors built a Late
Model Stock engine using the BOSS 351 block. To check out the article, visit the Circle Track site here.

Customers that purchased this item also purchased...
BOSS BLOCK STANDARD CAMSHAFT BEARINGS -- M-6261-J351
Our Price:$99.00

Add
BOSS BLOCK STANDARD CAMSHAFT BEARINGS -- M-6261-J351

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Engine Components > Engine Blocks
Mustang > 1994-2004 Mustang > Engine > Engine Blocks
Mustang > 1979-1993 Mustang > Engine > Engine Blocks
Mustang > Vintage Mustang Parts > Engine Parts > Engine Blocks
Hot Rod and Kit Car > Engine > Engine Blocks
Ford Racing By Speedshop Direct.com
A Subsidiary of
Autocars/Speedshop Direct

3212 El Camino Real Atascadero, CA 93422
 About Us
 Privacy Policy
 Send Us Feedback