Acceptance Mark


(Your shopping cart is empty)

  Home > Engine Components > Cylinder Heads >

EDELBROCK E-SERIES E-205 CYLINDER HEADS FOR S/B FORD W/ MECHANICAL FLAT TAPPET & HYDRAULIC ROLLER CAMSHAFT APPS (COMPLETE, SINGLE) - 5027


EDELBROCK E-SERIES E-205 CYLINDER HEADS FOR S/B FORD W/ MECHANICAL FLAT TAPPET & HYDRAULIC ROLLER CAMSHAFT APPS (COMPLETE, SINGLE)  - 5027


 
Our Price:$1,516.95



Part Number: 5027
Qty:

Description
 
EDELBROCK E-SERIES E-205 CYLINDER HEADS FOR S/B FORD W/ MECHANICAL FLAT TAPPET & HYDRAULIC ROLLER CAMSHAFT APPS (COMPLETE, SINGLE) - 5027

    E-SERIES E-205 FORD FEATURES:
  • Race-level performance while maintaining full compatibility with OEM equipment
  • Features larger runners for increased airflow and revised exhaust ports and larger diameter springs for higher lift camshafts making it ideal for a spec series racer and larger displacement engines
  • The exhaust port flange is in the stock location to allow for the use of off-the-shelf headers and hardware while the enlarged valves and ports support the power needed to compete at engine speeds of up to 6500 rpm
  • Capable of supporting more than 500 naturally aspirated horsepower and even more in forced induction applications

  • Cylinder Head Specifications:
  • Combustion chamber volume: 60cc
  • Intake runner volume: 205cc
  • Exhaust runner volume: 62cc
  • Intake valve diameter: 2.08"
  • Exhaust valve diameter: 1.60"
  • Valve stem diameter: 11/32"
  • Valve guides: Manganese Bronze
  • Deck thickness: 5/8"
  • Valve spring diameter: 1.46"
  • Valve spring maximum lift: .575"(5028) / .650"(5027)
  • Rocker stud: 3/8"
  • Guideplate: Hardened steel
  • Pushrod diameter: 5/16"
  • Valve angle: 20 degrees
  • Exhaust port location: Stock
  • Spark plug fitment: 14mm x 3/4 reach, gasket seat

INSTALLATION NOTE: Hardened pushrods required, use Edelbrock #9632 (flat tappet only) for 302 applications. Will not accept rail rockers. 289-302 V8s require Head Bolt Bushings #9680 and either Head Bolt Kit #8552 (7/16") or stock head bolts. Match with Edelbrock head gasket sets. Bare heads will have valve guides and seats installed, but will require final sizing & a valve job to match the valves you will be using. Recommended spark plugs are Champion RC12YC or equivalent 14mm x 3/4" reach with flat gasket seat.



Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Engine Components > Cylinder Heads
Ford Racing By Speedshop Direct.com
A Subsidiary of
Autocars/Speedshop Direct

3212 El Camino Real Atascadero, CA 93422
 About Us
 Privacy Policy
 Send Us Feedback