Acceptance Mark


(Your shopping cart is empty)

  Home > Engine Components > Cylinder Heads >

EDELBROCK PERFORMER RPM CYLINDER HEADS (72CC) FOR B/B FORD FE (COMPLETE, SINGLE) - 60069


EDELBROCK PERFORMER RPM CYLINDER HEADS (72CC) FOR B/B FORD FE (COMPLETE, SINGLE) - 60069


 
Click on each thumbnail below to see other views:


Our Price:$970.56



Part Number: 60069
Qty:

Description
 
EDELBROCK PERFORMER RPM CYLINDER HEADS (72CC) FOR B/B FORD FE (COMPLETE, SINGLE) - 60069

Performer RPM 390-428 Cobra Jet (72cc)
EQUIPPED WITH SPRINGS FOR USE IN HYDRAULIC FLAT TAPPET CAMSHAFT APPLICATIONS


Performer RPM heads are perfect for street performance, daily drivers, street rods and muscle cars where seat-of-the-pants performance is needed. These heads deliver great throttle response and power from 1500 to 6500 rpm. These heads feature the highest quality intake and exhaust valves and valve springs.

    PERFORMER RPM FE FEATURES:
  • Direct bolt-on heads for 1961-76 390-427-428 Fords
  • 428 Cobra Jet-sized valves promote excellent flow for streetable power
  • #60089 can be machined to accept 2.19" intake and 1.73" exhaust valves
  • Rocker shaft stud kit #6009 provides better rocker shaft retention and is highly recommended for use with Edelbrock FE heads. It eliminates wearing of the threads and the possibility of bottoming the rocker shaft bolts in the head.

  • Cylinder Head Specifications:
  • Combustion chamber volume: 72cc / 76cc
  • Intake runner volume: 170cc
  • Exhaust runner volume: 125cc
  • Intake valve diameter: 2.09"
  • Exhaust valve diameter: 1.66"
  • Valve stem diameter: 3/8"
  • Valve guides: Manganese bronze
  • Deck thickness: 5/8"
  • Valve spring diameter: 1.55"
  • Valve spring maximum lift: .600"
  • Rocker stud: N/A
  • Guideplate: N/A
  • Pushrod diameter: 3/8"
  • Valve angle: 13 degrees
  • Exhaust port location: Stock
  • Spark plug fitment: 14mm x 3/4 reach, gasket seat

#60069: Flow Numbers as tested by Edelbrock's SuperFlo SF-1020 flow bench @ 28" H2O
Valve Lift.100".200".300".400".500".600".700"
Intake88153195233265270-
Exhaust64113148171183200-

INSTALLATION NOTE: Match with Edelbrock head gasket sets. 76cc heads have vertical bolt pattern only, 390 GT exhaust will not fit. Bare heads will have valve guides and seats installed, but will require final sizing and a valve job to match the valves you will be using. Recommended spark plugs are Champion RC12YC or equivalent 14mm x 3/4" reach with flat gasket seat. Deck thickness: 5/8".

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Engine Components > Cylinder Heads
Ford Racing By Speedshop Direct.com
A Subsidiary of
Autocars/Speedshop Direct

3212 El Camino Real Atascadero, CA 93422
 About Us
 Privacy Policy
 Send Us Feedback