Acceptance Mark


(Your shopping cart is empty)

  Home > Crate Engines > 302/347/363ci Stroker Crate Engines >

M-6007-D347SR7 Ford Performance Sealed Crate Engine Assembly 347 CID Small Block 415HP 7mm Valves


M-6007-D347SR7 Ford Performance Sealed Crate Engine Assembly 347 CID Small Block 415HP 7mm Valves


 
FREE FREIGHT TO YOUR BUSINESS IN THE 48 CONTIGUOUS STATES
Our Price:$12,450.00



Part Number: M-6007-D347SR7
Qty:

Description Vehicle Application Chart
 
The Ford Performance D347SR7 engine has the power to win - right out of the crate. With lightweight 7MM valves, the D347SR7 features all of the latest developments and improvements from Ford Racing testing along with feedback from racers and engine builders coast to coast. These include parts to let the engine run at higher RPM for long periods without power loss. Improvements in machining minimize the power gains from blueprinting. The D347SR7 includes the following parts and machining improvements vs. the standard D347SR:
  • 7mm lightweight intake and exhaust valves
  • Hardened Steel Lifter pushrod cups
  • Block honed with deck plates
D347SR7 Features:
  • 347 cubic inches - 4.030" bore - 3.400" stroke
  • BOSS 302 race block - M-6010-BOSS302
  • 415 hp @ 6000 rpm 400 lb-ft @ 4900 rpm (with headers, and a 650 CFM Holley carburetor not included)
  • 10:1 Compression ratio (nominal)
  • SCAT forged crankshaft
  • SCAT forged steel cap screw connecting rods
  • Mahle forged pistons with floating pins
  • Hydraulic roller camshaft M-6250-F303, .528'' lift intake and exhaust, duration at .050" is 226 degrees intake and exhaust
  • PAC 1218 ovate beehive valve springs
  • Double roller timing chain set M-6268-A302
  • High-performance 7 quart rear sump circle track oil pan
  • Ford Racing aluminum "Z" cylinder heads M-6049-Z304DA7 with 2.02" intake valves and 1.60" exhaust valves
  • 1.65:1 ratio roller rocker arms
  • Edelbrock Victor Jr. intake manifold M-9424-D302
  • Edelbrock Water Pump
  • SFI approved vibration damper
  • MSD billet distributor
  • ARP Head Studs
  • Ford Racing polished aluminum Circle Track valve covers M-6582-CT
  • High volume oil pump
  • Engine is sealed for circle track competition where rules allow
  • Engine weight as equipped is 431 lbs. (includes 7 quarts of oil)
  • Additional technical information can be found at www. fordracingparts.com/circletrack
  • Competes directly with the GMPP "604" crate engine.
  • Engine is internally balanced, zero balance flywheel required
  • Depending on your application, a different timing cover, water pump, performance oil pan and pickup may be required. See installation notes
  • Fuel pump eccentric M-6287-B302 installed, allows use of mechanical fuel pump
  • A standard rotation water pump is installed on the engine. Other applications may require different water pumps and timing chain covers
  • Firing order 1-3-7-2-6-5-4-8 (5.0L HO and 351W order).
  • Built with current available parts. Photo and specs may vary.
  • Shipping weight approximately 475 lbs.
  • Race Application No Warranty
  • Only available to race teams competing in specific race series. Not for private use.

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Crate Engines > 302/347/363ci Stroker Crate Engines
Ford Racing By Speedshop Direct.com
A Subsidiary of
Autocars/Speedshop Direct

3212 El Camino Real Atascadero, CA 93422
 About Us
 Privacy Policy
 Send Us Feedback