Airaid Cold Air Intake and DiabloSport Trinity 2011-2014 Mustang GT Combo

• You get the Airaid Cold Air Intake and the DiabloSport Trinity for the 2011-2014 Ford Mustang.
• Keeps the hot air out and the cold air in.
• Peak increases of over 35HP and 35 ft-lbs at the rear wheels.
  
• The DiabloSport Trinity includes tunes specific to the Airaid Cold Air Intake.
• Trinity is also setup to display the A/F ratio (Huge savings over expensive aftermarket gauges)
• Fits 2011-2014 Mustang GT
• Fits automatic and manual transmissions
• Easy 1 hour install time
  

• Comes Pre-Loaded with various calibrations including custom tunes for the Airaid Intake
  
• Fast read and write process
  
• The ability to raise the speed limiter/governor (something the Ford Racing Pro-Cal tool cannot do)
• Allows the end user to adjust fuel, timing, rev limits, shift points etc. (something the Pro-Cal tool cannot do)
• Correct the speedometer for aftermarket tire size and gear ratios
• Includes extra space for 5 custom tunes (something the Pro-Cal tool cannot do)
• Datalog vehicle sensor data (an advanced diagnostic feature that the Pro-Cal tool cannot do)
• Read and erase diagnostic trouble codes for check engine lights
• Virtual Gauge Pack with customer customizable gauge layouts (Special A/F Gauge readout now included)
• Virtual Drag Strip to conduct performance tests

• 2011-2014 GT 5.0L V8

MODULAR VENTURI TECHNOLOGY

AIRAIDs hot, new intake system for the 2011-2014 Mustang 5.0L V-8 (p/n 451-264) is actually two intake systems in one. AIRAIDs newest Cool Air Dam intake utilizes Modular Venturi Technology to generate an additional 11 horsepower and 11 lb/ft of torque while maintaining proper air and fuel ratios across the entire RPM range WITH THE STOCK PCM TUNING. The system boasts a large roto-molded intake tube for a BEEFY look, that is mated to a lightweight composite Cool Air Dam.What makes AIRAIDs system different from the rest is the Modular Venturi Tube. The MVT is what maintains proper air/fuel ratios with the stock electronic tuning. But in order to take advantage of such serious performance bolt on such as high-lift camshafts, big-port cylinder heads, headers and other high-performance parts, the MVT can be removed for even more horsepower and torque gains when used with DiabloSports Trinity's included the custom Airaid tunes with the MVT removed. This gives serious Mustang performance enthusiasts the ability to retain the AIRAID intake as they add serious performance upgrades to the car without worrying about the need to upgrade the air intake for added air flow.

SUPERIOR AIR FLOW AND FILTRATION AT NO EXTRA COST

EASY INSTALLATION

AIRAIDs new Mustang Air Intake System comes complete with all the necessary mounting hardware and complete, detailed instructions for easy installation. The install can be accomplished by the average driveway mechanic in about an hour. The following photos highlight a typical installation. If you're a 5.0L V8 Mustang owner looking to unleash the hidden horsepower and torque that is sitting under the hood of your car, without the use of aftermarket programmers, then AIRAIDs new 5.0L V8 Mustang intake system is worth checking out.

The DiabloSport Trinity is also very easy to install:

• Plug the Trinity cable into your diagnostic port located under the driver side dash.
• The Trinity will turn on and boot up to a menu screen. (If the screen does not light-up, then replace your cigarette lighter fuses)
• Proceed to installation, agree to the disclaimer, and choose the appropriate tune:
  • If leaving the MVT insert inside of the intake tube, then choose from the standard Diablo tunes. There are different tunes for different octane fuels used in the vehicle.
  • If you are removing the MVT insert from the intake tube, then you must choose from the Airaid CAI tune(s). There are tunes for other CAI (cold air intakes) listed but you must choose from the Airaid CAI tunes when you are removing the MVT insert from the intake tube.
• You can also choose to modify any of the tunes to correct the speedometer, raise speed governor, and other advanced parameters.
• The DiabloSport Trinity will record and save your original OEM software and then install the new tune you chose. You will be prompted to go through a series of key cycles and screen prompts during this process.
• Total install time for the tuning during the initial installation is about 15 minutes.