Acceptance Mark


(Your shopping cart is empty)

  Home > Engine Components > Cylinder Heads >

EDELBROCK PERFORMER RPM SCCA CYLINDER HEADS FOR S/B FORD W/ HYDRAULIC FLAT TAPPET CAMSHAFT APPS (COMPLETE, SINGLE) - 602579


EDELBROCK PERFORMER RPM SCCA CYLINDER HEADS FOR S/B FORD W/ HYDRAULIC FLAT TAPPET CAMSHAFT APPS (COMPLETE, SINGLE)  - 602579


 
Our Price:$732.15


Part Number: 602579
Qty:

Description
 
EDELBROCK PERFORMER RPM SCCA CYLINDER HEADS FOR S/B FORD W/ HYDRAULIC FLAT TAPPET CAMSHAFT APPS (COMPLETE, SINGLE) - 602579

These heads are designed exclusively for the SCCA American Sedan Series Class. They feature 1.94" intake, 1.55" exhaust valve sizes and non interlocking valve seats. To comply with class rules, there is no blending work in the intake entries, exhaust exits or bowl area of the intake or exhaust. The casting is manufactured of A356 aluminum and heat treated to T6 spec for superior quality. All heads include manganese-bronze valve guides, one-piece stainless steel valves with hardened tips, ductile iron valve seats and Heli-Coil threaded inserts in the exhaust and rocker stud holes. Bare heads will require final sizing of the valve guides and proper valve job prior to the installation of valves. All Edelbrock SCCA RPM heads are engraved with the SCCA approved logo and are legal for the American Sedan Class. For additional information, please refer to the SCCA rule book. Match with the SCCA approved Performer RPM intake, #7121.


  • Cylinder Head Specifications:
  • Combustion chamber volume: 60cc
  • Intake runner volume: 170cc
  • Exhaust runner volume: 60cc
  • Intake valve diameter: 1.94"
  • Exhaust valve diameter: 1.55"
  • Valve stem diameter: 11/32"
  • Valve guides: Manganese bronze
  • Deck thickness: 5/8"
  • Valve spring diameter: Springs NOT Included
  • Valve spring maximum lift: N/A
  • Rocker stud: 3/8"
  • Guideplate: Hardened steel
  • Pushrod diameter: 5/16"
  • Valve angle: 20 degrees
  • Exhaust port location: Stock
  • Spark plug fitment: 14mm x 3/4 reach, gasket seat


INSTALLATION NOTE: Hardened pushrods required, use Edelbrock #9632 (flat tappet only). Will not accept rail rockers. 289-302 V8s require Head Bolt Bushings #9680 and either Head Bolt Kit #8552 (7/16") or stock head bolts. Match with Edelbrock head gasket sets. Bare heads will have valve guides and seats installed, but will require final sizing and a valve job to match the valves you will be using. Recommended spark plugs are Champion RC12YC or equivalent 14mm x 3/4" reach with flat gasket seat. This head does not include valve springs due to the wide variety of camshafts used in competition. Please consult your camshaft manufacturer for appropriate valve spring selection. Deck thickness: 5/8", rocker stud diameter: 3/8", pushrod diameter: 5/16" (width of slot in guide plate).



Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Engine Components > Cylinder Heads
Ford Racing By Speedshop Direct.com
A Subsidiary of
Autocars/Speedshop Direct

3212 El Camino Real Atascadero, CA 93422
 About Us
 Privacy Policy
 Send Us Feedback