FORD RACING 2010 MUSTANG V-6 MUFFLER KIT

Description

T-304 stainless construction
Louder, "throatier" exhaust note
Includes muffler with Ford Racing embossed 3.5" exhaust tip
For 2005-2009 V6 Mustang see M-5230-5V6
50 state drive-by noise legal

Muffler Installation Notes:

Install time takes less than an hour with common wrench and ratchet/socket set. The trick to installing any axle-back muffler setup on these cars is to unbolt the hangers from the car and remove the stock mufflers with the hanger brackets still on the muffler. Then you transfer the hanger brackets to the corresponding mounts on the new muffler and install/re-fasten the hangers and muffler back to the frame. Then repeat the process on the muffler on the other side of the car. Finally, you will fasten the mufflers to the respective axle pipes using the supplied clamps. These are OEM mufflers so the fitment and weld quality are accurate and strong.

If you try to remove/replace the mufflers by sliding/prying the mounts out of the hanger brackets, you will bend and damage the mufflers mounts. The hanger brackets are purposely setup in way that the muffler mounts cannot easily work themselves free from the hanger brackets on the car so don't try this method.