Acceptance Mark


(Your shopping cart is empty)

  Home > Engine Components > Cylinder Heads >

EDELBROCK PERFORMER RPM CYLINDER HEADS FOR S/B FORD 351C (COMPLETE, SINGLE) - 61629


EDELBROCK PERFORMER RPM CYLINDER HEADS FOR S/B FORD 351C (COMPLETE, SINGLE) - 61629


 
Click on each thumbnail below to see other views:


Our Price:$1,271.50


Part Number: 61629
Qty:

Description
 
EDELBROCK PERFORMER RPM CYLINDER HEADS FOR S/B FORD 351C (COMPLETE, SINGLE) - 61629

Performer RPM 351C
EQUIPPED WITH SPRINGS FOR USE IN HYDRAULIC FLAT TAPPET CAMSHAFT APPLICATIONS


Performer RPM heads are perfect for street performance, daily drivers, street rods and muscle cars where seat-of-the-pants performance is needed. These heads deliver great throttle response and power from 1500 to 6500 rpm. These heads feature the highest quality intake and exhaust valves and valve springs.

    PERFORMER RPM 351C FEATURES:
  • Designed for 351C, 351M & 400M Ford engines
  • Very streetable 190cc intake runners
  • 2.05" intake and 1.60" exhaust valves
  • "Compact charge" kidney shape combustion chamber design
  • Intake and exhaust ports based on 2V design
  • Optimized spark plug location provides improved header clearance
  • Match with Edelbrock RPM Air-Gap manifold #7564

  • Cylinder Head Specifications:
  • Combustion chamber volume: 60cc
  • Intake runner volume: 190cc
  • Exhaust runner volume: 90cc
  • Intake valve diameter: 2.05"
  • Exhaust valve diameter: 1.60"
  • Valve stem diameter: 11/32"
  • Valve guides: Manganese bronze
  • Deck thickness: 5/8"
  • Valve spring diameter: 1.55"
  • Valve spring maximum lift: .580"
  • Rocker stud: 7/16"
  • Guideplate: Hardended steel
  • Pushrod diameter: 5/16"
  • Valve angle: Same as OE 9.5 degrees
  • Exhaust port location: Stock
  • Spark plug fitment: 14mm x 3/4 reach, gasket seat

#61629: Flow Numbers as tested by Edelbrock's SuperFlo SF-1020 flow bench @ 28" H2O
Valve Lift.100".200".300".400".500".600".700"
Intake58120180227260265-
Exhaust54105138151161165-

INSTALLATION NOTE: Match with Edelbrock head gasket sets on pages 84-85. Bare heads will have valve guides and seats installed, but will require final sizing and a valve job to match the valves you will be using. Recommended spark plugs 14mm x 3/4" reach with flat gasket seat (Champion RC12YC). Deck thickness: 5/8", rocker stud diameter: 7/16", pushrod diameter: 5/16" (width of slot in guide plate). Valve sizes are recommended, not maximum.

*Not legal for sale or use on pollution controlled motor vehicles.

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Engine Components > Cylinder Heads
Ford Racing By Speedshop Direct.com
A Subsidiary of
Autocars/Speedshop Direct

3212 El Camino Real Atascadero, CA 93422
 About Us
 Privacy Policy
 Send Us Feedback