Acceptance Mark


(Your shopping cart is empty)

  Home > Engine Components > Cylinder Heads >

EDELBROCK PERFORMER RPM CYLINDER HEADS W/ 2.02" INTAKE VALVES FOR S/B FORD, MECHANICAL FLAT TAPPET AND HYDRAULIC ROLLER CAMSHAFT APPS. (COMPLETE, SINGLE) - 60255


EDELBROCK PERFORMER RPM CYLINDER HEADS W/ 2.02" INTAKE VALVES FOR S/B FORD, MECHANICAL FLAT TAPPET AND HYDRAULIC ROLLER CAMSHAFT APPS. (COMPLETE, SINGLE) - 60255


 
Our Price:$825.50


Part Number: 60255
Qty:

Description
 
EDELBROCK PERFORMER RPM CYLINDER HEADS W/ 2.02" INTAKE VALVES FOR S/B FORD, MECHANICAL FLAT TAPPET AND HYDRAULIC ROLLER CAMSHAFT APPS. (COMPLETE, SINGLE) - 60255

Performer RPM with 2.02" intake valves
EQUIPPED WITH SPRINGS FOR USE IN MECHANICAL FLAT TAPPET AND HYDRAULIC ROLLER CAMSHAFT APPS

Performer RPM heads are perfect for street performance, daily drivers, street rods and muscle cars where seat-of-the-pants performance is needed. These heads deliver great throttle response and power from 1500 to 6500 rpm. These heads feature the highest quality intake and exhaust valves and valve springs.

  • Designed for non-emissions 289, 302, and 351-Windsor Ford engines
  • Maximum performance in the 1500-6500 rpm range for high performance street applications
  • 1.90" intake valves are for use with stock pistons and high-flow 2.02" intake valves work with pistons notched for valve clearance
  • Will not accept rail rockers
  • 289-302 V8's require head bolt bushing #9680 and either head bolt kit #8552 (7/16") or stock bolts

  • Cylinder Head Specifications:
  • Combustion chamber volume: 60cc
  • Intake runner volume: 170cc
  • Exhaust runner volume: 60cc
  • Intake valve diameter: 2.02"
  • Exhaust valve diameter: 1.60"
  • Valve stem diameter: 11/32"
  • Valve guides: Manganese bronze
  • Deck thickness: 5/8"
  • Valve spring diameter: 1.460"
  • Valve spring maximum lift: .575"
  • Rocker stud: 3/8"
  • Guideplate: Hardended steel
  • Pushrod diameter: 5/16"
  • Valve angle: 20 degrees
  • Exhaust port location: Stock
  • Spark plug fitment: 14mm x 3/4 reach, gasket seat


INSTALLATION NOTE: Hardened pushrods required, use Edelbrock #9632 (flat tappet only). Will not accept rail rockers. 289-302 V8s require Head Bolt Bushings #9680 and either Head Bolt Kit #8552 (7/16") or stock head bolts. Match with Edelbrock head gasket sets. Bare heads will have valve guides and seats installed, but will require final sizing & a valve job to match the valves you will be using. Recommended spark plugs are Champion RC12YC or equivalent 14mm x 3/4" reach with flat gasket seat.

*Not legal for sale or use on pollution controlled motor vehicles.

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Engine Components > Cylinder Heads
Ford Racing By Speedshop Direct.com
A Subsidiary of
Autocars/Speedshop Direct

3212 El Camino Real Atascadero, CA 93422
 About Us
 Privacy Policy
 Send Us Feedback