Acceptance Mark


(Your shopping cart is empty)

  Home > Engine Components > Cylinder Heads >

EDELBROCK VICTOR SERIES (SEMI-FINISHED, REQUIRES PROFESSIONAL WORK) CYLINDER HEADS FOR S/B FORD (BARE, SINGLE) -- 77219


EDELBROCK VICTOR SERIES (SEMI-FINISHED, REQUIRES PROFESSIONAL WORK) CYLINDER HEADS FOR S/B FORD (BARE, SINGLE)  -- 77219


 
Our Price:$652.95


Part Number: 77219
Qty:

Description
 
EDELBROCK VICTOR SERIES (SEMI-FINISHED, REQUIRES PROFESSIONAL WORK) CYLINDER HEADS FOR S/B FORD (BARE, SINGLE) -- 77219

This cylinder head is designed for maximum effort competition racing on 289 - 351+ cubic inch based engines. The inline valve configuration features a 15 degree valve angle and a modern combustion chamber design allows for high compression without large piston domes. The intake ports are raised .380"; however the intake flange has been extended to maintain proper port alignment with standard intake manifolds. The exhaust ports are patterned with a 2.50" spacing and raised .520" for high flow potential. This head requires shaft mounted rockers; please contact Jesel or T&D for details. Features include 47cc combustion chambers, ductile iron interlocking valve seats, manganese-bronze valve guides and requires professional preparation. Edelbrock recommends 2.125" intake valves and 1.625" exhaust valves with 5.45" overall length.

  • Cylinder Head Specifications:
  • Combustion chamber volume: 47cc
  • Intake runner volume: 240cc
  • Exhaust runner volume: 80cc
  • Intake valve diameter: 2.125" (rec.) NOT included
  • Exhaust valve diameter: 1.625" (rec.) NOT included
  • Valve stem diameter: 11/32"
  • Valve guides: Manganese bronze
  • Deck thickness: 5/8"
  • Valve spring diameter: N/A
  • Valve spring maximum lift: N/A
  • Rocker stud: N/A
  • Guideplate: N/A
  • Pushrod diameter: N/A
  • Valve angle: 15 degrees
  • Exhaust port location: 2.5" spread; raised .520"
  • Spark plug fitment: 14mm x 3/4 reach, gasket seat

INSTALLATION NOTE: This head requires the use of a 14mm x 3/4" reach, flat gasket spark plug with a heat range appropriate to your application. Deck thickness: 5/8".



Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Engine Components > Cylinder Heads
Ford Racing By Speedshop Direct.com
A Subsidiary of
Autocars/Speedshop Direct

3212 El Camino Real Atascadero, CA 93422
 About Us
 Privacy Policy
 Send Us Feedback