MBRP 2005-2010 Ford Mustang GT/ 2007-2010 Shelby GT500 Dual Mufflers Axle Back, Split Rear -- S7200AL
|
|
MBRP 2005-2010 Ford Mustang GT Dual Axle Back Muffler Delete, T304 -- S7202304
|
List Price:$401.46 Our Price:$324.99 You save $76.47!
|
|
|
List Price:$407.63 Our Price:$329.99 You save $77.64!
|
|
|
|
|
- Mirror Polished T304 Stainless Steel Tips
- True Muscle Car Sound
- Bolt-on Easy Install
|
MBRP's Pro Series is the best performance exhaust system that money can buy. It is a series designed and built for the serious enthusiast who will settle for nothing less. Constructed from T304 stainless steel it delivers you optimal durability that keeps on looking its best. Easy to clean and maintain this is the product of choice for owners of lifted vehicles, show trucks or who operate in severe environments.
|
|
FORD RACING 2005-2008 MUSTANG V-6 MUFFLER KIT
|
|
FORD RACING 2010 MUSTANG V-6 MUFFLER KIT
|
|
|
|
|
- T-304 stainless construction
- Louder, "throatier" exhaust note
- 50 state drive-by noise legal
- Includes muffler with Ford Racing embossed 3.5" exhaust tip
Muffler Installation Notes: Install time takes less than an
hour with common wrench and ratchet/socket set. The trick to installing
any axle-back muffler setup on these cars is to unbolt the hangers from
the car and remove the stock mufflers with the hanger brackets still on
the muffler. Then you transfer the hanger brackets to the
corresponding mounts on the new muffler and install/re-fasten the
hangers and muffler back to the frame. Then repeat the process on the
muffler on the other side of the car. Finally, you will fasten the
mufflers to the respective axle pipes using the supplied clamps. These
are OEM mufflers so the fitment and weld quality are accurate and
strong. If you try to remove/replace the mufflers by
sliding/prying the mounts out of the hanger brackets, you will bend and
damage the mufflers mounts. The hanger brackets are purposely setup in
way that the muffler mounts cannot easily work themselves free from the
hanger brackets on the car so don't try this method.
|
- T-304 stainless construction
- Louder, "throatier" exhaust note
- Includes muffler with Ford Racing embossed 3.5" exhaust tip
- For 2005-2009 V6 Mustang see M-5230-5V6
- 50 state drive-by noise legal
Muffler Installation Notes: Install time takes less than an
hour with common wrench and ratchet/socket set. The trick to installing
any axle-back muffler setup on these cars is to unbolt the hangers from
the car and remove the stock mufflers with the hanger brackets still on
the muffler. Then you transfer the hanger brackets to the
corresponding mounts on the new muffler and install/re-fasten the
hangers and muffler back to the frame. Then repeat the process on the
muffler on the other side of the car. Finally, you will fasten the
mufflers to the respective axle pipes using the supplied clamps. These
are OEM mufflers so the fitment and weld quality are accurate and
strong. If you try to remove/replace the mufflers by
sliding/prying the mounts out of the hanger brackets, you will bend and
damage the mufflers mounts. The hanger brackets are purposely setup in
way that the muffler mounts cannot easily work themselves free from the
hanger brackets on the car so don't try this method.
|
|
FORD RACING 2011-2014 MUSTANG GT SVT MUFFLER SET -- M-5230-MGTCA1
|
|
MBRP 2005-2010 Ford Mustang GT Dual Mufflers Axle Back, Split Rear, T304 -- S7200304
|
List Price:$559.99 Our Price:$405.00 You save $154.99!
(3)
|
|
|
List Price:$605.28 Our Price:$489.99 You save $115.29!
|
|
|
|
|
- Fits 2011-2014 Mustang GT
- Aluminized 409 stainless steel corrosion-resistant body with polished 304 stainless 4" diameter tips
- Standard on 2011-2012 Shelby GT500
- Throatier exhaust note
- 50 state drive-by noise legal
- The best 2011-2012 Mustang exhaust value. Great sound and no drone.
- OEM direct bolt-on.
- Backed by Ford Racing warranty.
- SPECIFICALLY DOES NOT NULLIFY THE EXISTING NEW VEHICLE WARRANTY.
Muffler Installation Notes:
Install time takes less than an hour with common wrench and ratchet/socket set. The trick to installing any axle-back muffler setup on these cars is to unbolt the hangers from the car and remove the stock mufflers with the hanger brackets still on the muffler. Then you transfer the hanger brackets to the corresponding mounts on the new muffler and install/re-fasten the hangers and muffler back to the frame. Then repeat the process on the muffler on the other side of the car. Finally, you will fasten the mufflers to the respective axle pipes using the supplied clamps. These are OEM mufflers so the fitment and weld quality are accurate and strong.
If you try to remove/replace the mufflers by sliding/prying the mounts out of the hanger brackets, you will bend and damage the mufflers mounts. The hanger brackets are purposely setup in a way that the muffler mounts cannot easily work themselves free from the hanger brackets on the car so don't try this method.
|
- Mirror Polished T304 Stainless Steel Tips
- True Muscle Car Sound
- Bolt-on Easy Install
|
|
FORD RACING 2011-2014 MUSTANG GT SPORT MUFFLER KIT -- M-5230-MGTLA
|
|
FORD RACING 2011-2014 MUSTANG V6 TOURING MUFFLER (50 STATE) -- M-5230-MV6CA
|
List Price:$850.00 Our Price:$775.00 You save $75.00!
(4)
|
|
|
List Price:$870.00 Our Price:$795.00 You save $75.00!
(1)
|
|
|
|
|
- Fits 2011-2014 Mustang GT.
- Fits 2012-2013 Boss 302
- T-304 stainless construction
- Louder, "throatier" exhaust note
- Designed to eliminate exhaust drone at sustained RPMs
- Includes mufflers with Ford Racing embossed 4" exhaust tips
- 49 state drive-by noise legal (not legal in CA)
- For 2005-2009 Mustang GT see M-5230-5GT, For 2010 Mustang GT see M-5230-MGTLA
Muffler Installation Notes: Install time takes less than an
hour with common wrench and ratchet/socket set. The trick to installing
any axle-back muffler setup on these cars is to unbolt the hangers from
the car and remove the stock mufflers with the hanger brackets still on
the muffler. Then you transfer the hanger brackets to the
corresponding mounts on the new muffler and install/re-fasten the
hangers and muffler back to the frame. Then repeat the process on the
muffler on the other side of the car. Finally, you will fasten the
mufflers to the respective axle pipes using the factory clamps. These
are OEM mufflers so the fitment and weld quality are accurate and
strong. If you try to remove/replace the mufflers by
sliding/prying the mounts out of the hanger brackets, you will bend and
damage the mufflers mounts. The hanger brackets are purposely setup in a
way that the muffler mounts cannot easily work themselves free from the
hanger brackets on the car so don't try this method.
Listen to the sound clip below:
|
- Fits 2011-2014 Mustang V6.
- T-304 stainless construction
- Louder, "throatier" exhaust note
- Includes mufflers with Ford Racing embossed 3.5" exhaust tip
- 50 state drive-by noise legal
- For 2005-2009 V6 Mustang see M-5230-5V6 for 2010 Mustang V6 see M-5230-MV61
- SPECIFICALLY DOES NOT NULLIFY THE EXISTING NEW VEHICLE WARRANTY.
Muffler Installation Notes: Install time takes less than an
hour with common wrench and ratchet/socket set. The trick to installing
any axle-back muffler setup on these cars is to unbolt the hangers from
the car and remove the stock mufflers with the hanger brackets still on
the muffler. Then you transfer the hanger brackets to the
corresponding mounts on the new muffler and install/re-fasten the
hangers and muffler back to the frame. Then repeat the process on the
muffler on the other side of the car. Finally, you will fasten the
mufflers to the respective axle pipes using the supplied clamps. These
are OEM mufflers so the fitment and weld quality are accurate and
strong. If you try to remove/replace the mufflers by
sliding/prying the mounts out of the hanger brackets, you will bend and
damage the mufflers mounts. The hanger brackets are purposely setup in
way that the muffler mounts cannot easily work themselves free from the
hanger brackets on the car so don't try this method.
|
|
2013-2014 MUSTANG GT AXLE BACK QUAD TIP MUFFLERS WITH REAR LOWER VALENCE -- M-5230-MSVTCD
|
|
|
List Price:$999.00 Our Price:$855.00 You save $144.00!
|
|
|
|
- Fits 2013-2014 Mustang GT
- 409 aluminized stainless steel corrosion-resistant muffler
body construction with twin polished 304 stainless steel 4" diameter
tips
- Mufflers are original equipment on 2013-2014 Mustang Shelby GT500
- Throatier exhaust note
- Clamp-on installation
- Shelby GT500 rear lower valence includes installation hardware
- Cutting of original lower fascia required for installation of GT500 valence
- 50 state drive-by noise legal
|
|