Acceptance Mark

Official PayPal Seal



(Your shopping cart is empty)
You are here: Home > Exterior Parts
Sort By
Page of 2
Ford Performance License Plate - Single -- M-1828-FPONE 2015-16 MUSTANG 5.0L FENDER EMBLEM CHROME -- M-1447-M50A
List Price:$13.50
Our Price:$10.95
You save $2.55!
List Price:$35.00
Our Price:$32.00
You save $3.00!
FORD PERFORMANCE LICENSE PLATE - SINGLE -- M-1828-FPONE 2015-16 MUSTANG 5.0L FENDER EMBLEM CHROME -- M-1447-M50A

Ford Performance License Plate - Single

M-1828-FPONE

  • This license plate has a Ford Performance logo on white background
  • Sold individually
  • Original equipment on 2015-2016 Mustang GT
  • Includes right and left side emblems
  • Two-way tape for easy installation
  • Injection molded plastic
  • Chrome finish
2011 MUSTANG 5.0L FENDER EMBLEM -- M-1447-M50 F-SERIES AUX LIGHT HARNESS FOR TRUCKS EQUIPPED WITH OEM SWITCHES -- M-15525-HNSB
Our Price:$33.95

(1)
Our Price:$49.00
2011 MUSTANG 5.0L FENDER EMBLEM -- M-1447-M50 F-SERIES AUX LIGHT HARNESS FOR TRUCKS EQUIPPED WITH OEM SWITCHES -- M-15525-HNSB
  • Original equipment on 2011 Mustang GT
  • Includes right and left side emblems
  • Two-way tape for easy installation
  • Wiring kit works with M-15200-8HIDB 8" HID Light Kit and Ford F-series trucks with in-dash aux switch panel
  • Wiring kit works with M-15200-8HALB 8" Halogen Light Kit and Ford F-series trucks with in-dash aux switch panel
  • Wiring kit works with M-15200-6HIDB 6" HID Light Kit and Ford F-series trucks with in-dash aux switch panel

Parts ordered after 7/1/2013 include weatherpack connectors that match light kits ordered after 7/1/2013

THIS WIRING KIT DOES NOT INCLUDE THE SWITCHES. IT IS DESIGNED TO CONNECT THE FORD RACING LIGHTS KITS TO THE OEM AUXILIARY DASH SWITCHES.

Shelby GT500 "Cobra" Fender Emblems F-SERIES AUX LIGHT HARNESS FOR TRUCKS EQUIPPED WITHOUT OEM AUX DASH SWITCHES -- M-15525-HNSA
Our Price:$75.00
Our Price:$125.00
Shelby GT500 "Cobra" Fender Emblems F-SERIES AUX LIGHT HARNESS FOR TRUCKS EQUIPPED WITHOUT OEM AUX DASH SWITCHES -- M-15525-HNSA
  • Original equipment on 2007-2009 Shelby GT500
  • Includes right and left side emblems
  • 4.250" tall by 2.50" wide
  • Wiring kit works with M-15200-8HIDB 8" HID Light Kit and Ford F-series trucks without in-dash aux switch panel
  • Wiring kit works with M-15200-8HALB 8" Halogen Light Kit and Ford F-series trucks without in-dash aux switch panel
  • Wiring kit works with M-15200-6HIDB 6" HID Light Kit and Ford F-series trucks without in-dash aux switch panel

THIS WIRING KIT INCLUDES AFTERMARKET SWITCHES.  IT DOES NOT INCLUDE THE OEM FORD AUX SWITCH PANEL.  IT IS DESIGNED TO CONNECT THE FORD RACING LIGHTS KITS TO F-SERIES TRUCKS THAT ARE NOT EQUIPPED WITH THE AUX DASH SWITCHES.

FORD RACING RAPTOR EXHAUST TIP -- M-5255-F15R 2007-2009 Shelby GT500 Rear Spoiler -- M-16600-SVTC
Our Price:$249.95

(2)
Our Price:$265.00
FORD RACING RAPTOR EXHAUST TIP -- M-5255-F15R 2007-2009 Shelby GT500 Rear Spoiler -- M-16600-SVTC
  • Fits F150 SVT Raptor 2010-2013 and 2009-2010 F150 Harley truck with twin-pipe exhaust
  • Chromed stainless steel tips etched with Ford Racing Logo
  • 3.5" outside diameter
  • Angle cut design
  • Easy to install clamp on design
  • Includes clamps
  • Same as Ford OEM part number: 7L3Z-5255-AB (Retails at Ford Dealer for $476.61)
  • Note: Will not fit aftermarket exhaust systems.
  • Fits 2005-2009 Mustang GT
  • Original equipment on 2007-2009 Shelby GT500
  • Fits into existing Mustang GT spoiler bolt holes
  • No drilling required when installed on Mustang GT with factory spoiler
  • Must be painted to match color of car
BOSS 302 LAGUNA SECA FRONT SPLITTER SUPPORT ROD KIT -- M-16601H-MB MUSTANG BOSS 302S FRONT GRILL -- M-8200-MBR
Our Price:$299.59
List Price:$382.00
Our Price:$342.00
You save $40.00!

(1)
BOSS 302 LAGUNA SECA FRONT SPLITTER SUPPORT ROD KIT -- M-16601H-MB MUSTANG BOSS 302S FRONT GRILL -- M-8200-MBR
Replacement support rod and corresponding hardware for the Boss 302 Laguna Seca Front Splitter.
  • Fits: 2010-2012 Mustang GT and 2012 Mustang Boss 302
  • Production front grill on Ford Racing Mustang Boss 302S Race Car
  • Modified grill insert increases airflow to the radiator
  • Fog light openings cut out and filled with heavy duty wire mesh
  • Accepts stock Boss 302 Mustang Grille Emblem
  • Flat black finish
2013 MUSTANG BOSS 302S FRONT GRILL -- M-8200-MBRA FORD RACING SVT RAPTOR LIGHT BAR -- M-15266-F15RBAR
List Price:$403.00
Our Price:$356.00
You save $47.00!
Our Price:$359.00

(3)
2013 MUSTANG BOSS 302S FRONT GRILL -- M-8200-MBRA FORD RACING SVT RAPTOR LIGHT BAR -- M-15266-F15RBAR
  • Fits: 2013 Mustang GT and 2013 Mustang Boss 302
  • Production front grill on 2013 Ford Racing Mustang Boss 302S Race Car
  • Modified grill insert increases airflow to the radiator
  • Fog light openings cut out and filled with heavy duty wire mesh
  • Accepts stock 2013 Boss 302 Mustang Grille Emblem
  • Flat black finish
  • Fits 2010-2013 F150 SVT Raptor
  • Made from 1-3/4" O.D.,  .120" wall steel tubing
  • Comes with light tabs for mounting 4 six or eight inch diameter lights
  • Easy installation, bolts up to existing factory holes, no drilling required
  • Grey powder coated finish
  • LIGHTS SOLD SEPARATELY
    • For 8" Round Auxiliary Halogen Lights see M-15200-8HALB
    • For 6" Round Auxiliary High Intensity Discharge Lights see M-15200-6HIDB
    • For 8" Round Auxiliary High Intensity Discharge Lights see M-15200-8HIDB
  • WIRING KIT SOLD SEPARATELY
    • Wiring kit M-15525-HNSA works with light kit and Ford Trucks without in-dash aux switch panel
    • Wiring kit M-15525-HNSB works with light kit and Ford Trucks with in-dash aux switch panel
  • FOR OFF-ROAD USE ONLY!
  • May obstruct frontview camera on 2012-2013 SVT Raptor
FORD RACING 2009-2012 F150 (EXCLUDING RAPTOR) LIGHT BAR -- M-15266-F15 FORD RACING RAPTOR ENHANCED SKIDPLATE -- M-5018-F15R
Our Price:$359.00
List Price:$699.00
Our Price:$625.00
You save $74.00!

(1)
FORD RACING 2009-2012 F150 (EXCLUDING RAPTOR) LIGHT BAR -- M-15266-F15 FORD RACING RAPTOR ENHANCED SKIDPLATE -- M-5018-F15R
  • Fits 2009-2012 F150.  DOES NOT FIT SVT RAPTOR
  • Made from 1-3/4" O.D.,  .120" wall steel tubing
  • Comes with light tabs for mounting 4 six or eight inch diameter lights
  • Easy installation, bolts up to existing factory frame location, no drilling required
  • Ford Racing Logo stamped into end plate
  • Retains use of factory tow hooks
  • Black powder coated finish
  • LIGHTS SOLD SEPARATELY
    • For 8" Round Auxiliary Halogen Lights see M-15200-8HALB
    • For 6" Round Auxiliary High Intensity Discharge Lights see M-15200-6HIDB
    • For 8" Round Auxiliary High Intensity Discharge Lights see M-15200-8HIDB
  • WIRING KIT SOLD SEPARATELY
    • Wiring kit M-15525-HNSA works with light kit and Ford Trucks without in-dash aux switch panel
    • Wiring kit M-15525-HNSB works with light kit and Ford Trucks with in-dash aux switch panel
  • FOR OFF-ROAD USE ONLY!
  • This product will impact performance of airbag system
  • Made In USA
  • Fits F-150 SVT Raptor
  • Replaces production front skid plate
  • Added side and center reinforcements
  • Complete with mounting brackets and hardware
  • Powder-coated "foundry finish" gray
  • "Ford Racing" logo, right and left sides
FORD RACING BOSS 302 MUSTANG FRONT SPLITTER KIT PARTIAL -- M-16601P-MB 8" ROUND AUXILIARY HALOGEN LIGHTS -- M-15200-8HALB
List Price:$734.95
Our Price:$659.95
You save $75.00!
Our Price:$675.00

(1)
FORD RACING BOSS 302 MUSTANG FRONT SPLITTER KIT PARTIAL -- M-16601P-MB 8" ROUND AUXILIARY HALOGEN LIGHTS -- M-15200-8HALB
  • Fits 2010-2012 Mustang GT with GT/CS or BOSS lower fascia insert part # BR3Z-17626-AB
  • Increases front downforce for road racing and open track applications
  • Splitter made from durable ABS material
  • Does not include necessary M-17A626-MB Bumper Beam Bracket
  • Off road use only
  • Black powdercoated housing
  • 100-watt halogen bulbs
  • Matching black ABSstone guards
  • Four lights per kit
  • Two long-range lights andtwo driving lights
  • May obstruct frontview camera on 2012-2013 SVT Raptor
  • FOR OFF-ROAD USE ONLY!
  • WIRING KIT IS NOT INCLUDED AND IS SOLD SEPARATELY!!
    • Wiring kit M-15525-HNSA works with light kit and Ford Trucks without in-dash aux switch panel
    • Wiring kit M-15525-HNSB works with light kit and Ford Trucks with in-dash aux switch panel
  • LIGHT BAR IS NOT INCLUDED AND IS SOLD SEPARATELY!!
    • Use M-15266-F15RBAR for Ford F150 SVT Raptor
    • Use M-15266-F15 for 2009-2012 Ford F150
    • Use M-15266-F25 for 2008-2012 Ford F250 Super Duty
FORD RACING 2012 BOSS 302 MUSTANG FRONT SPLITTER KIT -- M-16601-MB 6" ROUND AUXILIARY HIGH INTENSITY DISCHARGE LIGHTS -- M-15200-6HIDB
List Price:$829.95
Our Price:$749.95
You save $80.00!
List Price:$849.00
Our Price:$779.00
You save $70.00!
FORD RACING 2012 BOSS 302 MUSTANG FRONT SPLITTER KIT -- M-16601-MB 6" ROUND AUXILIARY HIGH INTENSITY DISCHARGE LIGHTS -- M-15200-6HIDB
  • Fits 2010-2012 Mustang GT with GT/CS or BOSS lower fascia insert part # BR3Z-17626-AB
  • Increases front downforce for road racing and open track applications
  • Splitter made from durable ABS material
  • Brackets are black powdercoated
  • Includes M-16601P-MB Splitter and M-17A626-MB Bracket and Installation hardware
  • Off road use only
  • 6" round black composite polymax housing
  • Two long-range lights and two driving lights
  • Built-in, internal HID ballast
  • Intense, super bright HID bulb
  • Adjustable mounting bracket for easy and accurate aiming
  • Protective and stylish ABS stone guard included
  • FOR OFF-ROADUSE ONLY!
  • WIRING KIT IS NOT INCLUDED AND IS SOLD SEPARATELY!!
    • Wiring kit M-15525-HNSA works with light kit and Ford Trucks without in-dash aux switch panel
    • Wiring kit M-15525-HNSB works with light kit and Ford Trucks with in-dash aux switch panel
  • LIGHT BAR IS NOT INCLUDED AND IS SOLD SEPARATELY!!
    • Use M-15266-F15RBAR Light Bar for Ford F150 SVT Raptor
    • Use M-15266-F15 Light Bar for 2009-2012 Ford F150
    • Use M-15266-F25 Light Bar for 2008-2012 Ford F250 Super Duty
2011-2012 MUSTANG GT SHAKER HOOD SYSTEM -- M-16612-SHKB 2010 MUSTANG GT SHAKER HOOD SYSTEM -- M-16612-SHK
List Price:$899.00
Our Price:$780.00
You save $119.00!
List Price:$899.00
Our Price:$780.00
You save $119.00!
2011-2012 MUSTANG GT SHAKER HOOD SYSTEM -- M-16612-SHKB 2010 MUSTANG GT SHAKER HOOD SYSTEM -- M-16612-SHK
  • Fits 2011-2012 Mustang GT
  • Delivers cold air to OEM airbox
  • Stock hood was specifically designed by Ford engineers with reinforcement in the stamping for this shaker hood scoop kit.
  • System attaches to intake manifold, through factory engine cover
  • Includes engine tray with cast aluminum scoop that is reminiscent of the original 1969-1970 Shaker models
  • Kit includes all mounting hardware, ductwork, template and detailed instructions
  • Factory strut tower brace can remain in place
  • Installation can be completed in two hours or less with basic tools
  • Will not fit with supercharger or turbo kits.  Utilizes the OEM air box and air box location
  • 50 State legal and OEM warranty safe.
  • For 2005-2009 Mustang GT refer to M-16612-SHK59
  • For 2010 Mustang GT refer to M-16612-SHK
  • Fits 2010 Mustang GT
  • Delivers cold air to OEM airbox
  • Stock hood was specifically designed by Ford engineers with reinforcement in the stamping for this shaker hood scoop kit.
  • Includes engine cover with Ford Racing badges and cast aluminum scoop that is reminiscent of the original 1969-1970 Shaker models
  • Kit includes all mounting hardware, ductwork, template and detailed instructions
  • Factory strut tower brace can remain in place
  • Installation can be completed in three hours or less with basic tools
  • Will not fit with supercharger or turbo kits.  Utilizes the OEM air box and air box location
  • 50 State legal and OEM warranty safe.
  • For 2005-2009 Mustang GT refer to M-16612-SHK59
  • For 2011-2012 Mustang GT refer to M-16612-SHKB
   
 
Ford Racing By Speedshop Direct.com
A Subsidiary of
Autocars/Speedshop Direct

3212 El Camino Real Atascadero, CA 93422
 About Us
 Privacy Policy
 Send Us Feedback