Acceptance Mark


(Your shopping cart is empty)
You are here: Home > Mustang > 2010 Mustang > 5.4L Shelby GT500 > Supercharger Upgrade Kits

Ford Racing Supercharger Systems:
The MOST Tested and Proven Supercharger Kits and Calibrations on the Market

  • 100 hours of extreme durability testing
  • Tested in Ford's Climatic (-40F to 131F) and Altitude facility (-282 ft. to 12,000 ft.)
  • Fitted and tested in real world conditions through the Ford Arizona Proving Grounds, high altitude locations, and much more.
  • 50 State Emissions Legal
Sort By
Page of 1
2007-2012 SHELBY GT500 TVS Supercharger 2.6 Inch Pulley (Adds 4-5 lbs of boost) -- GT 210261 SHELBY GT500 UPGRADED 90MM ADJUSTABLE IDLER ARM ASSEMBLY -- GT 9000
Our Price:$159.67

(2)
more info
Our Price:$249.97
more info
2007-2012 SHELBY GT500 TVS Supercharger 2.6 Inch Pulley (Adds 4-5 lbs of boost) -- GT 210261 SHELBY GT500 UPGRADED 90MM ADJUSTABLE IDLER ARM ASSEMBLY -- GT 9000
These pieces are the highest quality supercharger pulleys for your Shelby GT500. This pulley is a 10-rib 2.6 inch diameter drive pulley for the aftermarket TVS Supercharger. It is meant to have a stock look while allowing you to gain performance with an additional 4 psi of boost on the TVS supercharger.

AFTERMARKET COMPUTER CALIBRATION REQUIRED
As with any supercharger pulley upgrade, an aftermarket computer calibration is required and is not included. The Ford Racing ProCal tuner does not support this supercharger pulley change.

MUST USE GT 9000 IDLER TENSIONER ARM ASSEMBLY
The OEM tensioner arm does not have enough range of motion to ensure proper belt tension. Failure to purchase and install our tensioner arm assembly when using a smaller than stock supercharger pulley will result in belt slippage under acceleration.

Why these pulleys are better

  • Each pulley consists of precision machined grooves to ensure proper fitment with the belt. Inferior designed grooves will rip belts apart. The pulley to belt contact area is a critical design element and the pulley design is the result of many revisions to virtually eliminate slippage.
  • To eliminate the issue of the pulley slipping on the supercharger shaft, these pulleys are honed bore, round & straight within .0002.
  • Proper Lead-in is designed into each pulley to ensure that the it goes on straight.
  • Made In the USA
  • Components are CNC machined out of high quality aluminum.
  • High quality Type III hard coat anodized finish.
  • True double-bearing setup can withstand anything you throw at it!
  • Will work with ALL available superchargers, including the Kenne Bell!
  • Designed to work with most common supercharger pulleys.
  • Simple installation without modification!
Ford Performance Upgraded 5.4L GT500 Aluminum Intercooler -- M-6775-MSVT
List Price:$1,099.00
Our Price:$940.00
You save $159.00!
Free Shipping
more info
Ford Performance Upgraded 5.4L GT500 Aluminum Intercooler -- M-6775-MSVT
  • Fits 2007-2013 Mustang Shelby GT500 5.4L and 5.8L 4V engine
  • Excellent upgrade for prior model 2007-2012 GT500 and 5.4L Cobra Jet Mustangs
  • Freer flowing with less restriction and more efficient heat extraction than the production intercooler resulting in a cooler air charge and more power.  This more efficient intercooler also reduces heat soak and power drop-off.
  • This upgraded intercooler is an OEM production quality piece and is designed to replace the stock intercooler located inside the intake manifold underneath the supercharger compressor.
  • A great piece to compliment the installation of the Ford Racing Twin Screw 725-750HP supercharger kits.  Why not upgrade the intercooler while your swapping the compressor right?
  • Aluminum construction
  • Standard equipment on 2013 GT500 5.8L 4V
  • Includes supercharger and charge cooler gasket and o-rings
   
 
Ford Racing By Speedshop Direct.com
A Subsidiary of
Autocars/Speedshop Direct

3212 El Camino Real Atascadero, CA 93422
 About Us
 Privacy Policy
 Send Us Feedback