Acceptance Mark

Official PayPal Seal



(Your shopping cart is empty)
You are here: Home > Hot Rod and Kit Car > Engine > Hardware
Sort By
Page of 1
ROLLER PILOT BEARING FOR 289 / 302 / 351C AND 351W -- M-7600-A ROLLER PILOT BEARING 4.6L/5.4L AND 5.0L 4V TIVCT MODULAR ENGINES -- M-7600-B
Our Price:$12.95
Our Price:$12.95
ROLLER PILOT BEARING FOR 289 / 302 / 351C AND 351W -- M-7600-A ROLLER PILOT BEARING 4.6L/5.4L AND 5.0L 4V TIVCT MODULAR ENGINES -- M-7600-B
  • Production roller pilot bearing fits 289, 302, 351C and 351W crankshafts
  • Designed for .669 diameter input shaft

NOTE: Pre-greased - do not add extra grease. Clutch and bearing damage may occur
  • Production roller pilot bearing fits 4.6L/5.4L and 5.0L 4V TI-VCT modular engines

NOTE: Pre-greased do not add extra grease. Clutch and bearing damage may occur

BOSS 302/351W MAIN BOLT WITH STUD (SINGLE) -- CM-6345-A BOSS BLOCK STANDARD CAMSHAFT BEARINGS -- M-6261-J351
Our Price:$29.95

(2)
Our Price:$99.00
BOSS 302/351W MAIN BOLT WITH STUD (SINGLE) -- CM-6345-A BOSS BLOCK STANDARD CAMSHAFT BEARINGS -- M-6261-J351
  • Fits Ford Racing's Boss 302/351 and production 351W blocks
  • 1/2 inch main bolt with 3/8 stud, provides attachment point for rear sump pickup tube support bracket.
  • Under hex length 3.450"  Hex head thickness .540"  3/8 stud length .650"
  • Limited Supply
  • Fits 302/351W Ford Racing Blocks
  • Common outer diameter service replacement cam bearings for use in the following Ford Racing cast iron blocks:
    • M-6010-R302
    • M-6010-S302
    • M-6010-R351
    • M-6010-R352
    • M-6010-S351
    • M-6010-V351
    • M-6010-W351
    • M-6010-R451
    • M-6010-R452
    • M-6010-R453
    • M-6010-B302BB
    • M-6010-BOSS302
    • M-6010-BOSS35192
    • M-6010-BOSS35195
    • M-6010-BOSS351BB.




  • Use with standard/conventional/off-the-shelf camshaft designs where the 1-4 bearings are common but the 5the bearing is a different size.  If your camshaft is a custom ground camshaft with 1-5 common bearings, then you need to use M-6261-R351 cam bearing kit.
FORD RACING BOSS CYLINDER HEAD BOLT KIT -- M-6065-BOSS FORD RACING ARP CYLINDER HEAD BOLT KIT -- M-6065-D289
Our Price:$139.00

(1)
Our Price:$139.00
FORD RACING BOSS CYLINDER HEAD BOLT KIT -- M-6065-BOSS FORD RACING ARP CYLINDER HEAD BOLT KIT -- M-6065-D289
  • 1/2" cylinder head bolts required for installation of the Ford Racing M-6049-X306/X307/Z304DA heads onto the M-6010-BOSS302, M-6010-B302BB, M-6010-BOSS35195, M-6010-BOSS35192, M-6010-BOSS351BB blocks.
  • Includes hardened washers
  • Sold in engine sets
  • Use when installing stock 351W, Ford Racing cast iron (M-6049-L302/L303) or Ford Racing aluminum head (M-6049-Y302/Y303/X302/X303/X304/X305/X306/X307) on 289/302 blocks

  • Kit features 20 ARP cylinder head bolts with 7/16" diameter thread

  • Includes 20 special stepped washers

  • Sold in engine sets

FORD RACING 351W "Z" HEAD STUD KIT -- M-6014-Z304 FORD RACING BOSS CYLINDER HEAD STUD KIT -- M-6014-BOSS
Our Price:$179.95
Our Price:$235.00

(1)
FORD RACING 351W "Z" HEAD STUD KIT -- M-6014-Z304 FORD RACING BOSS CYLINDER HEAD STUD KIT -- M-6014-BOSS
  • Use when installing M-6049-Z304/Z304A/Z304D/Z304DA heads on a 351W block (except Boss 351 block)  
  • 1/2" diameter studs with 12-point nuts and hardened washers  
  • Sold in engine sets  
  • 1/2" cylinder head studs required for installation of the Ford Racing M-6049-X306/X307/Z304DA heads onto the M-6010-BOSS302, M-6010-B302BB, M-6010-BOSS35195, M-6010-BOSS35192, M-6010-BOSS351BB blocks.
  • Includes 12-point nuts and hardened washers
  • Sold in engine sets
NOTE: Check header to head stud and nut for clearance
FORD RACING PRO STOCK MIRROR IMAGE CYLINDER HEAD STUD KIT -- M-6014-JC50 FORD RACING PRO STOCK SEQUENTIAL CYLINDER HEAD STUD KIT -- M-6014-JC51
Our Price:$475.00
Our Price:$535.00
FORD RACING PRO STOCK MIRROR IMAGE CYLINDER HEAD STUD KIT -- M-6014-JC50 FORD RACING PRO STOCK SEQUENTIAL CYLINDER HEAD STUD KIT -- M-6014-JC51
  • Stud Kit fits Mirror Head M-6049-JC50 only  
  • Complete fastener kit includes studs, washers and twelve point nuts  
  • Produced by ARP of premium material    
  • Sold in engine sets
  • Stud Kit fits Sequential Head M-6049-JC51 only
  • Complete fastener kit includes studs, washers and twelve point nuts
  • Produced by ARP of premium material
  • Sold in engine sets
   
 
Ford Racing By Speedshop Direct.com
A Subsidiary of
Autocars/Speedshop Direct

3212 El Camino Real Atascadero, CA 93422
 About Us
 Privacy Policy
 Send Us Feedback