Acceptance Mark

Official PayPal Seal



(Your shopping cart is empty)
You are here: Home > Mustang > 2015-2018 MUSTANG PARTS > 2.3L I-4 Ecoboost > Engine
Choose a sub category:
Engine Dress Up
Sort By
Page of 1
2.3L ECOBOOST BALANCE SHAFT BLOCK-OFF PLUG -- M-6026-23BSBP M-12405-20T Ford Performance 2013-2017 Ford Focus ST/RS/Mustang Ecoboost Cold Spark Plug Set
List Price:$40.00
Our Price:$36.00
You save $4.00!
Our Price:$62.00
2.3L ECOBOOST BALANCE SHAFT BLOCK-OFF PLUG -- M-6026-23BSBP M-12405-20T Ford Performance 2013-2017 Ford Focus ST/RS/Mustang Ecoboost Cold Spark Plug Set
  • Fits 2.0L and 2.3L EcoBoost engines
  • Allows for removal of the balance shaft
  • 20 lb. decrease in rotating mass in the engine
  • Increases oil volume to the upper end of the engine

Ford Performance 2013-2017 Ford Focus ST/RS/Mustang Ecoboost Cold Spark Plug Set (4 Plugs)

M-12405-20T

  • Fits 2013-2017 Focus ST 2.0L 4 cylinder EcoBoost engine
  • Fits 2016-2017 Focus RS 2.3 4 cylinder EcoBoost engine
  • Fits 2015-2017 Mustang 4 cylinder EcoBoost engine
  • Iridium Power spark plugs made by Denso for Ford Performance
  • Two heat ranges colder than the stock 2.0L/2.3L Ecoboost engine spark plug
  • Same spark plugs that are included with M-9603A-FST Performance Calibration kit
  • For use in engines with higher than stock cylinder combustion pressures
  • Sold in engine sets of 4
  • Spark plugs gapped to 0.028-inch (0.71mm)
2.3L Ecoboost High Performance Cams -- M-6250-23EBH 2.3L Ecoboost Crankshaft -- M-6303-23EB
List Price:$300.00
Our Price:$260.00
You save $40.00!
List Price:$499.00
Our Price:$439.00
You save $60.00!
2.3L Ecoboost High Performance Cams  -- M-6250-23EBH 2.3L Ecoboost Crankshaft -- M-6303-23EB
  • Fits 2015 Mustang 2.3L EcoBoost engines
  • These cams provide more lift and duration
  • Intake cam lift increased from 7.9mm to 9.0 mm and duration increased 4 degrees to 240 degrees (total degrees)
  • Exhaust cam lift increased from 7.4mm to 7.8mm and duration increased 16 degrees to 240 degrees (total degrees)
  • Cams will work with stock pistons
  • No valve spring change is required
  • Production crankshaft as used in the 2.3L EcoBoost Mustang
  • Forged steel construction ready for installation
2.0L ECOBOOST HEAD INDIVIDUAL PORT -- M-6049-20EBIP
List Price:$900.00
Our Price:$800.00
You save $100.00!
2.0L ECOBOOST HEAD INDIVIDUAL PORT  -- M-6049-20EBIP
Cylinder head for the 2.0L EcoBoost engine as used in the European market.

Features individual exhaust ports
  • Intended for higher horsepower custom engine builds
  • Head comes assembled with valves and springs
  • Intake Valve Size 32.5mm
  • Exhaust Valve size 28mm (2.3L = 30mm)
  • Combustion chamber size - 42.2cc nominal
  • No camshaft or roller followers included
  • Production intake from all 2.0L and 2.3L engines will fit
  • Requires custom exhaust manifold
  • Designed with direct injection fuel system features
  • Uses 2.0L EU head gasket (AG9Z-6051-A)
  • Oil drainback passage modifications are necessary to use this head on the 2.3L Mustang EcoBoost block. Contact Ford Performance Techline for instructions.
   
 
Ford Racing By Speedshop Direct.com
A Subsidiary of
Autocars/Speedshop Direct

3212 El Camino Real Atascadero, CA 93422
 About Us
 Privacy Policy
 Send Us Feedback