Acceptance Mark

Official PayPal Seal



(Your shopping cart is empty)
You are here: Home > Mustang > 2011-2014 Mustang Parts > 5.0L V8 GT > Suspension
Sort By
Page of 1
Ford Racing 2005-2014 Mustang Jounce Bumper Kit -- M-5570-A REPLACEMENT MUSTANG GT SUSPENSION URETHANE BUSHING KIT FOR FR3 HANDLING PACKS -- M-5490-BKA
Our Price:$38.25

(4)
Our Price:$44.00
Ford Racing 2005-2014 Mustang Jounce Bumper Kit -- M-5570-A REPLACEMENT MUSTANG GT SUSPENSION URETHANE BUSHING KIT FOR FR3 HANDLING PACKS -- M-5490-BKA
  • Unique jounce bumpers designed for improved stability/ride comfort when used in conjunction with FRPP lowering springs
  • Fits 2005-2014 Mustang V6, GT and 2007-2011 Shelby GT500, original equipment on 2012-2014 Shelby GT500
  • Unique design
  • Recommended for lowered vehicles
  • Includes front and rear jounce bumpers.
This urethane bushing kit was developed in response to customers that needed replacement parts for the Ford Racing Roll Bars of the 2005-2012 Ford Mustang GT. The individual pieces in this kit are not offered for sale. This kit is your least expensive option to buy replacement bushings. If you need the clamps or bolts, then we also sell a hardware kit that also includes the same urethane bushings.

THIS IS NOT DESIGNED TO BE USED WITH THE STOCK MUSTANG GT SUSPENSION.

  • FITS 2005-2012 FORD RACING MUSTANG GT ROLL BAR KIT M-5490-A
  • FITS 2005-2012 FORD RACING MUSTANG GT HANDLING PACKAGE M-2005-FR3 AND M-FR3-MGT.
  • FITS SHELBY GT AND SHELBY GT-H MUSTANGS
2005-2014 MUSTANG CASTER AND CAMBER ALIGNMENT ECCENTRIC BOLT KIT -- M-3B236-A REPLACEMENT MUSTANG GT SUSPENSION STABILIZER BAR LINK FOR FR3 HANDLING PACKS -- M-5490-LINKA
List Price:$99.00
Our Price:$89.00
You save $10.00!
Our Price:$91.00

(1)
2005-2014 MUSTANG CASTER AND CAMBER ALIGNMENT ECCENTRIC BOLT KIT  -- M-3B236-A REPLACEMENT MUSTANG GT SUSPENSION STABILIZER BAR LINK FOR FR3 HANDLING PACKS -- M-5490-LINKA
    The Caster and Camber Eccentric Kit contains everything you need to adust the caster and camber on your 2005-2014 Mustang
  • Fits 2005-2014 Mustang

Kit contains:

  • Both front Camber Eccentric bolts
  • Both front Caster Eccentric bolts
  • All needed hardware
This stabilizer bar link was developed in response to customers that needed replacement parts for the Ford Racing Roll Bars of the 2005-2012 Ford Mustang GT. The individual pieces in this kit are not offered for sale. This kit is your least expensive option to buy a replacement stabilizer bar link for your Ford Racing FR3 handling pack in your Mustang GT. This link includes the bushing.

THIS IS NOT DESIGNED TO BE USED WITH THE STOCK MUSTANG GT SUSPENSION.

  • FITS 2005-2012 FORD RACING MUSTANG GT ROLL BAR KIT M-5490-A
  • FITS 2005-2012 FORD RACING MUSTANG GT HANDLING PACKAGE M-2005-FR3 AND M-FR3-MGT.
  • FITS SHELBY GT AND SHELBY GT-H MUSTANGS
2005-2014 MUSTANG REAR LOWER CONTROL ARM UPGRADE KIT-- M-5538-A 2005-2014 Mustang Front Strut Mount Upgrade Pair -- M-18183-C
Our Price:$149.95
Our Price:$159.00

(3)
2005-2014 MUSTANG REAR LOWER CONTROL ARM UPGRADE KIT -- M-5538-A 2005-2014 Mustang Front Strut Mount Upgrade Pair -- M-18183-C
  • Fits 2005-2011 Mustang GT, 2005-2014 Mustang GT with auto transmission, and 2005-2014 Mustang V6
  • Standard equipment on 2007-2014 Shelby GT500, 2013-2014 Mustang GT with Track Pack, and 2011-2014 Mustang GT with manual transmission
  • Increased bushing durometer and stiffness for high performance applications
  • For race applications see tubular control arm kits M-5649-S or M-5649-R1

NOTE:some factory fasteners are one time use. Please reference service manual for reuse information and correct torque specifications.

  • Fits 2005-2010 Mustang GT and V6
  • Fits 2011-2014 Mustang GT and V6 when used with Ford Racing lowering springs and dampers.
  • Fits 2007-2014 Shelby GT500
  • Original equipment on the 2011-2012 Shelby GT500 with SVT Track Pack Option
  • Will fit 2011-2014 Mustang V6 when used with Ford Racing Dampers M-18000-A or M-18000-C and M-5300-N springs
  • Will fit 2011-2014 Mustang GT when used with Ford Racing Dampers M-18000-A or M-18000-C and M-5300-K or M-5300-P springs.
  • Increased durometer over base strut mount
  • Eliminate the popping/clunking
    noise often associated with lowered Mustang's with these upgraded
    strut mounts from Ford Racing.
REPLACEMENT MUSTANG GT SUSPENSION HARDWARE KIT FOR FR3 HANDLING PACKS -- M-5490-HWA 2005-2014 MUSTANG LOWER CONTROL ARM RELOCATION BRACKET -- M-5650-A
Our Price:$175.00
Our Price:$175.95
REPLACEMENT MUSTANG GT SUSPENSION HARDWARE KIT FOR FR3 HANDLING PACKS -- M-5490-HWA 2005-2014 MUSTANG LOWER CONTROL ARM RELOCATION BRACKET -- M-5650-A
This hardware kit was developed in response to customers that needed replacement clamps, bolts, and bushings for the Ford Racing Roll Bars of the 2005-2012 Ford Mustang GT. The individual pieces in this kit are not offered for sale. This hardware kit is your least expensive option to buy replacement front sway bar clamps, bolts, and links. If you just need the urethane bushings or rear sway bar links and do not need the front sway bar clamps or bolts, then we also sell a separately in a urethane bushing kit or individual rear sway bar links.

THIS IS NOT DESIGNED TO BE USED WITH THE STOCK MUSTANG GT SUSPENSION.

  • FITS 2005-2012 FORD RACING MUSTANG GT ROLL BAR KIT M-5490-A
  • FITS 2005-2012 FORD RACING MUSTANG GT HANDLING PACKAGE M-2005-FR3 AND M-FR3-MGT.
  • FITS SHELBY GT AND SHELBY GT-H MUSTANGS
  • Fits 2005-2014 Mustang GT and 2007-2013 Shelby GT500
  • Bracket allows adjustemnt of rear lower control arm mounting point at axle
  • Allows adjustment of instant center for optimium traction
  • A must have for reducing wheel-hop
  • Will not fit stock Mustang GT OR Shelby GT500 lower control arms.
  • Requires aftermarket lower control arms like Ford Racing M-5649-R1
Ford Racing 2005-2014 Mustang GT Strut Tower Brace -- M-20201-S197 Mustang FR500C Rear Lower Control Arms -- M-5649-R1
List Price:$212.00
Our Price:$185.00
You save $27.00!
Our Price:$214.00
Ford Racing 2005-2014 Mustang GT Strut Tower Brace -- M-20201-S197 Mustang FR500C Rear Lower Control Arms -- M-5649-R1
  • Fits 2005-2010 Mustang GT without Engine Dress-Up Cover.
  • Fits 2011-2014 Mustang GT with Engine Dress-Up Cover
  • Parallel beam design for added rigidity
  • Black powder coated
  • Stainless steel Ford Racing emblem
  • Strut Tower Brace does not fit V-6, supercharged GT, optional intake shroud, BOSS 302 or Ford Racing Intake Manifolds.
  • Will clear 2011+ 5.0L Coyote engine cover in 2011+ Mustang GT vehicles.
  • Note: Some factory fasteners are one time use. Please reference a Ford service manual for reuse information and correct torque specifications.
  • Service replacement for the Mustang FR500C and Boss 302R race car
  • Fits all 2005-2014 Mustang V-6, GT, Shelby GT-500 and 2012-2013 Boss 302
  • Features low deflection urethane bushings and tubular steel construction.
  • Increased stiffness for mininal suspension deflection
  • The kit comes complete with bushings and sleeves and can be installed with basic shop tools.
  • Great for use with rear control arm relocation kit M-5650-A
  • Replacement urethane bushing/sleeve kit available M-5638-A
  • For street applications see SVT control arm kit M-5538-A
  • For tubular control arms with spherical bearing ends see control arm kit M-5649-S
BOSS 302 STRUT TOWER BRACE -- AR3Z-16A200-A Ford Racing 2005-2014 Mustang GT Coupe 1 Inch Lowering Springs -- M-5300-P
List Price:$243.75
Our Price:$215.99
You save $27.76!
Our Price:$230.00
BOSS 302 STRUT TOWER BRACE -- AR3Z-16A200-A Ford Racing 2005-2014 Mustang GT Coupe 1 Inch Lowering Springs -- M-5300-P
  • Improves handling and reduces chassis flex
  • Original equipment on the limited edition BOSS 302 Mustang
  • Bright silver powder-coated finish adds to your clean underhood styling
  • Easy installation can be done with basic hand tools in less than 15 minutes.  The ends of the brace have directional arrows so you cannot put it in backwards.  Just remove the two inner nuts located on each strut tower, place the strut tower brace over the existing studs, and re-install and tighten the nuts.
  • Designed to clear the "taller" BOSS 302 intake manifold (M-9424-M50BR) but will therefore also clear the stock 2005-2012 Mustang GT, Bullitt and V6 intake manifolds and hoods.  Will also clear the optional 4.6L 3V plastic engine cover/intake shroud (M-6949-3V).  Does not fit Shelby GT500.
  • Will clear the Ford Racing 4.6L 3V Intake Manifold M-9424-463V
  • Will not clear the Top Mounted Twin Screw/Roots Supercharger Kits (Roush, Magnuson, Whipple, Ford Racing, Saleen, TVS, Edelbrock etc.).
  • Progressive rate spring, designed for increased handling and performance
  • Lowers 2005-2014 Mustang GT coupe approximately 1.5" (2011-2014 Mustangs require M-18000-A Damper Kit, M-5570-A Jounce Bumper Kit, and M-18183-C SVT Strut Mounts with these springs)
  • Standard equipment on Shelby GT and Shelby GT-H
  • Use with M-18000-A and M-5490-A for optimum performance
  • Note: Some factory fasteners are one time use. Please reference a Ford service manual for reuse information and correct torque specifications.
FORD RACING 2005-2014 MUSTANG ADJUSTABLE PANHARD BAR -- M-4264-A Ford Racing 2005-2014 Mustang GT Coupe Sway Bar Kit -- M-5490-A
List Price:$282.00
Our Price:$258.00
You save $24.00!

(2)
List Price:$477.00
Our Price:$443.00
You save $34.00!
FORD RACING 2005-2014 MUSTANG ADJUSTABLE PANHARD BAR -- M-4264-A Ford Racing 2005-2014 Mustang GT Coupe Sway Bar Kit -- M-5490-A
  • Fits 2005-2014 Mustang V6/GT/Boss 302 and 2007-2014 Shelby GT500.
  • Allows adjustment to the rear suspension vs the factory non-adjustable bar. Especially useful when using our FR3 handling packs that lower the vehicle.
  • 1.125" OD x.095 wall thickness 4130 chrome moly bar for increased rigidity more predictable handling
  • Low deflection urethane rod ends and steel sleeves offer decreased flex for tighter handling and less wear
  • Unique offset mounts allows the panhard bar to clear rear differential cove
  • Service replacement part for the FR500S and BOSS302 R1 race car
  • Also for use on NASA AI and AIX class S197 Mustangs
  • Sway bar kit designed for increased handling and performance on 2005-2014 Mustang GT coupe
  • Best when used with M-18000-A or M-18000-C struts/shocks and M-5300-P springs (1.0 inch Drop)
  • Includes all mounting hardware
  • Note:Some factory fasteners are one time use. Please reference a Ford service manual for reuse information and correct torque specifications.
  • For replacement bushings use bushing kit M-5490-BKA
Ford Racing 2005-2014 Mustang GT Convertible Anti-Roll Bar Kit 2005-2013 MUSTANG TUBULAR LOWER CONTROL ARM KIT -- M-5649-S
Our Price:$460.00
List Price:$535.95
Our Price:$479.95
You save $56.00!
Ford Racing 2005-2014 Mustang GT Convertible Anti-Roll Bar Kit 2005-2013 MUSTANG TUBULAR LOWER CONTROL ARM KIT -- M-5649-S
  • Anti-roll bar kit designed for increased handling and performance on 2005-2014 Mustang GT Convertible
  • Best when used with Ford Racing dampers and Ford Racing 1 inch lowering springs
  • Includes all mounting hardware
  • Note: Some factory fasteners are one time use. Please reference a Ford service manual for reuse information and correct torque specifications.

  •    Service replacement part for 2012 Mustang Boss 302S Race Car
  • Fits 2005-2014 Mustang GT and 2007-2014 Shelby GT500
  • Made from steel tube with high strength spherical rod ends.
  • Increased stiffness for minimal suspension deflection
  • Non-adjustable
  • Off-road use only
  • Great for use with rear control arm relocation kit M-5650-A
Ford Racing 2005-2014 Mustang Coupe Damper Kit -- M-18000-A FORD RACING ADJUSTABLE DAMPERS KIT -- M-18000-C
List Price:$764.00
Our Price:$642.00
You save $122.00!
Our Price:$889.00
Ford Racing 2005-2014 Mustang Coupe Damper Kit -- M-18000-A FORD RACING ADJUSTABLE DAMPERS KIT -- M-18000-C
  • Engineered specifically for improved handing on the 2005-2014 Mustang coupe
  • Dynamic Suspension dampers, same manufacturer as Mustang FR500C race car
  • Unique Ford Racing performance tune
  • Standard equipment on the Shelby GT and Shelby GT-H
  • Designed specifically for lowered vehicles
  • 2005-2010 Mustang GT coupe owners: Use with M-5300-K or M-5300-P and M-5490-A for optimum performance
  • 2005-2010 Mustang V6 coupe owners: Use with M-5300-N and M-5490-C for optimum performance
  • 2011-2014 Mustang GT coupe owners: Must use with M-5300-K or M-5300-P lowering
    springs, M-18183-C upper strut mounts, and M-5570-A jounce stops.  
    M-5490-A roll bars are recommended for optimum performance.
  • 2011-2012 Mustang V6 coupe owners: Must use with M-5300-N lowering
    springs, M-18183-C upper strut mounts, and M-5570-A jounce stops.  
    M-5490-C roll bars are recommended for optimum performance.
  • Note: Some factory fasteners are one time use. Please reference a Ford service manual for reuse information and correct torque specifications.
  • Fits 2007-2014 Shelby GT500 (except 2013-2014 Track Pack) and 2005-2010 Mustang GT
  • Will fit 2011-2014 Mustang GT when used with Ford Racing springs and upper strut mounts M-18183-C
  • Engineered specifically for improved handing on both stock ride height and lowered 2007-2012 Shelby GT500 and 2005-2013 Mustang GT
  • Single adjustment with two-way response with multiple settings for firmness
  • Recommended for Shelby GT500 use with M-5300-L Spring Kit, M-5490-B Anti-roll Bar kit and M-20201-C Strut Tower Brace (2007-2009 Shelby GT500 only) or M-20201-MSVTC for 2010-2011 Shelby GT500
  • Recommended for Mustang GT use with M-5300-P Spring Kit (1.0" drop), M-5300-K Spring Kit (1.5" drop), M-5490-A Anti-roll Bar Kit and M-20201-S197 Strut Tower Brace

Dampers are adjustable and manufactured by Dynamic Suspensions. (the same company that makes dampers for the FR500C race car)

Ford Performance 2005-2014 Mustang GT Coupe Assembled Handling Pack -- M-FR3A-MGTA Ford Performance 2005-2014 Mustang GT Coupe Assembled Adjustable FR3 Handling Pack -- M-FR3A-MGTAA
List Price:$1,895.00
Our Price:$1,375.00
You save $520.00!

(2)
List:$2,275.00
Introductory Special:$1,695.00
You save $580.00!
Ford Performance 2005-2014 Mustang GT Coupe Assembled Handling Pack -- M-FR3A-MGTA Ford Performance 2005-2014 Mustang GT Coupe Assembled Adjustable FR3 Handling Pack
  • Fits: 2005-2014 Mustang GT Coupe.
  • All components are designed to work together as a package
  • Lowers car approximately 1.0 Inch
  • Handling Pack Includes:


    • Ford Performance Assembled Front Struts M-18000-A with Ford Performance rear shocks.  Struts and Shocks are non-adjustable.  Use the M-FR3A-MGTAA handling pack if adjustable struts and shocks are desired.
    • Ford Performance 1 Inch Lowering Springs M-5300-P
    • Ford Performance Upgraded Strut Mount M-18183-C
    • Ford Performance Jounce Bumper Kit M-5570-A.
    • Ford Performance Adjustable Sway Bar Kit M-5490-A
    • Ford Performance Adjustable Rear Panhard Bar M-4264-A

    • Includes all factory required one-time use fasteners and camber adjustment bolts
    • Note: Some factory fasteners are one time use. Please reference service manual for reuse information and correct torque specifications. Requires alignment after installation.
  • Fits 2005-2014 Mustang GT Coupe.
  • All components are designed to work together as a package
  • Lowers car approximately 1.0 Inch.
  • Includes:
    • Ford Performance Assembled adjustable Front Struts M-18000-C with adjustable rear shocks
    • Ford Performace 1 Inch Lowering Springs M-5300-P
    • Ford Performance Upgraded Strut Mount M-18183-C
    • Ford Performance Jounce Bumpers M-5570-A
    • Ford Performance Adjustable Sway Bar Kit M-5490-A
    • Ford Performance Adjustable Rear Panhard Bar M-4264-A
    • Includes all factory required one-time use fasteners and camber adjustment bolts for re-alignment
    • Note: Some factory fasteners are one time use. Please reference service manual for reuse information and correct torque specifications. Requires alignment after installation.
   
 
Ford Racing By Speedshop Direct.com
A Subsidiary of
Autocars/Speedshop Direct

3212 El Camino Real Atascadero, CA 93422
 About Us
 Privacy Policy
 Send Us Feedback