FORD RACING WHEEL NUTS (5 PACK) -- M-1012-G
|
|
FORD RACING MUSTANG BOSS 302S FRONT WHEEL BLACK WITH MACHINED FACE -- M-1007-DC199LGB
|
|
Local Ford Dealer's Price:$888.78 Introductory Special:$249.95 You save $638.83!
(1)
|
|
|
|
|
- Service replacement for the Mustang FR500S and BOSS 302S race car.
- 1/2"-20 thread plated steel cone seat lug nuts
- Open-ended for use with long wheelstuds
- 13/16" hex
- Fits 2005-2013 Mustang and most other 1/2"-20 applications
|
- 2005-2014 Mustang GT, 2007-2014 Shelby GT500 and 2005-2014 Mustang V6
- Standard equipment on Ford Racing Mustang Boss 302S factory-built race car M-FR500-B302S
- 19" x 9" wide
- 5-lug, 4.5" bolt circle
- 42 mm offset
- 6.7" backspacing
- Machined face with gloss black accents
- Clear coated to OEM standards
-
Includes Mustang Bar and Pony center cap M-1096-A
- Clears OEM Brembo brakes and M-2300-S and M-2300-T Brake Kit
- Valve stem TPMS compatible
|
|
FORD RACING MUSTANG BOSS 302S REAR WHEEL BLACK WITH MACHINED FACE -- M-1007-DC1910LGB
|
|
2010-2013 MUSTANG 2010-2012 GT500 TPMS SENSORS AND ACTIVATION TOOL KIT -- M-1180-A
|
Local Ford Dealer's Price:$841.62 Introductory Special:$249.95 You save $591.67!
|
|
|
List Price:$399.00 Our Price:$269.00 You save $130.00!
(1)
|
|
|
|
|
- 2005 - 2014 Mustang GT, 2007-2014 Shelby GT500 and 2005-2014 Mustang V6
- Standard equipment on Ford Racing Mustang Boss 302S factory-built race car M-FR500-B302S
- 19" x 10" wide
- 5-lug, 4.5" bolt circle
- 47.5 mm offset
- 7.4" backspacing
- Machined face with gloss black accents
- Clear coated to OEM standards
- Includes Mustang Bar and Pony center cap M-1096-A
- Clears OEM Brembo brakes and M-2300-S and M-2300-T Brake Kit
- Valve stem TPMS compatible
|
- Fits 2010-2013 Mustang V6 and Mustang GT
- Fits 2010-2012 Shelby GT500
- Kit contains 4-valve mounted snap-in tire pressure monitor sensors and tire pressure monitor activation tool
- 2010-2013 Mustang requires that tire pressure monitor sensors are installed and
properly activated. Failure to install and activate sensors will cause tire pressure monitor light to remain on - Activation tool can be used to retrain sensors after tire rotation
- Warning: Requires wheels specifically designed for valve-mounted snap-in-tire pressure monitor sensors
Note : Will NOT work on 2007-2009 Mustang V6, GT or GT500. Valve stems are not designed for speeds over 155 mph
|
|
M-1007KIT-DC199LGB Mustang Boss 302S 19X9 Wheel Set With TPMS Sensor Kit
|
|
M-1007KIT-DC19910LGB Mustang Boss 302S 19X9 Front 19X10 Rear Wheel Set With TPMS Sensor Kit
|
|
List Price:$1,200.00 Our Price:$1,099.99 You save $100.01!
(3)
|
|
|
|
|
- 2005-2014 Mustang GT, 2007-2014 Shelby GT500 and 2005-2014 Mustang V6
- WHEELS WILL FIT 2013-2014 SHELBY GT500.
- Note: Included TPMS valve stems are not compatible with 2013-2014 GT500.
- Includes four wheels and M-1180-A Mustang TPMS Sensor and Activation Tool
- Standard equipment on Ford Racing Mustang Boss 302S factory-built race car M-FR500-B302S
- 19" x 9" wide
- 5-lug, 4.5" bolt circle
- 42 mm offset
- 6.7" backspacing
- Machined face with gloss black accents
- Clear coated to OEM standards
-
Includes Mustang Bar and Pony center cap M-1096-A
- Clears OEM Brembo brakes Shelby GT500 and 2011+ Mustang GT/Boss 302 and the Ford Racing M-2300-S Brembo Brake Kit.
- Valve Stem TPMS Sensors are not compatible with Band Style TPMS
systems. While the wheels will fit, Band Style TPMS vehicles will still
trigger a TPMS dash light unless Band Style TPMS sensors are used.
|
- 2005-2014 Mustang GT, 2007-2014 Shelby GT500 and 2005-2014 Mustang V6
- WHEELS WILL FIT 2013-2014 SHELBY GT500.
- Note: Included TPMS valve stems are not compatible with 2013-2014 GT500.
- Includes two front 19" x 9" wheels and two rear 19" x 10" wheels and M-1180-A Mustang TPMS Sensor Kit and Activation Tool
- 5-lug, 4.5" bolt circle
- Machined face with gloss black accents
- Clear coated to OEM standards
-
Includes Mustang Bar and Pony center cap M-1096-A
- Clears OEM Brembo brakes Shelby GT500 and 2011+ Mustang GT/Boss 302 and the Ford Racing M-2300-S Brembo Brake Kit.
- Valve Stem TPMS Sensors are not compatible with Band Style TPMS
systems. While the wheels will fit, Band Style TPMS vehicles will still
trigger a TPMS dash light unless Band Style TPMS sensors are used.
|
|