Acceptance Mark


(Your shopping cart is empty)
You are here: Home > Hot Rod and Kit Car > Drivetrain > Transmission Parts
Sort By
Page of 1
ROLLER PILOT BEARING FOR 289 / 302 / 351C AND 351W -- M-7600-A ROLLER PILOT BEARING 4.6L/5.4L AND 5.0L 4V TIVCT MODULAR ENGINES -- M-7600-B
Our Price:$15.00

(1)
more info
Our Price:$15.00
more info
ROLLER PILOT BEARING FOR 289 / 302 / 351C AND 351W -- M-7600-A ROLLER PILOT BEARING 4.6L/5.4L AND 5.0L 4V TIVCT MODULAR ENGINES -- M-7600-B
  • Production roller pilot bearing fits 289, 302, 351C and 351W crankshafts
  • Designed for .669 diameter input shaft

NOTE: Pre-greased - do not add extra grease. Clutch and bearing damage may occur
  • Production roller pilot bearing fits 4.6L/5.4L and 5.0L 4V TI-VCT modular engines

NOTE: Pre-greased do not add extra grease. Clutch and bearing damage may occur

10.5 INCH CLUTCH BOLT KIT -- M-6397-A302 31 SPLINE DRIVESHAFT YOKE -- M-4841-A
Our Price:$20.00

(2)
more info
Our Price:$115.00

(4)
more info
10.5 INCH CLUTCH BOLT KIT -- M-6397-A302 31 SPLINE DRIVESHAFT YOKE -- M-4841-A
  • Use with Ford Racing flywheels to align and attach the 10.5" diaphragm-style clutch pressure plate to the flywheel
  • This kit includes three dowel pins that are necessary to align and stiffen the pressure plate shell. NOTE: If these dowels are not used
    the clutch may chatter
  • This kit includes six 8mm bolts with integral lock washers. NOTE: Ford Racing and production flywheels have metric bolt holes for diaphragm style clutches. Ford Racing billet steel flywheels also have
    5/16"-18 SAE bolt holes for long style clutches.
  • Fits 31-spline output shafts
  • The Splines have an undercut  .530" long, with a 1.425" I.D.
  • Uses 1330 U-joints
    Use with production T-45, C-6, 3550 and 3650 transmissions
  • U-joint cap diameter 1.062"
  • U-joint width 3.500"
  • Yoke O.D. is 1.685"
  • Machined area length, 6.068"
  • Center of u-joint to front of yoke, 7.750" (approx.)
FORD RACING CAST IRON FLYWHEEL 289/302/351W 6 BOLT, 157 TOOTH, 50 OUNCE UNBALANCE -- M-6375-B302 FORD RACING BILLET STEEL FLYWHEEL 289/302/351W 6 BOLT, 157 TOOTH, 50 OUNCE UNBALANCE -- M-6375-C302B
Our Price:$155.95
more info
Our Price:$255.00

(2)
more info
FORD RACING CAST IRON FLYWHEEL 289/302/351W 6 BOLT, 157 TOOTH, 50 OUNCE UNBALANCE -- M-6375-B302 FORD RACING BILLET STEEL FLYWHEEL 289/302/351W 6 BOLT, 157 TOOTH, 50 OUNCE UNBALANCE -- M-6375-C302B
Ford Racing performance flywheels are high quality and precision machined.  Each one is designed for specific engine and clutch setups.  These flywheels go great with our Ford Racing built crate engines and production style offerings from Ford Racing.

Specific Features:
  • OEM Cast Iron direct replacement for 1986-1995 5.0 Mustangs
  • 157 Tooth (make sure you have a 157 tooth compatible starter)
  • 50 oz.-in. imbalance (for 50 oz-in externally balanced engines)
  • 6 Bolt setup for 6 Bolt crankshafts
  • Will fit 10.5" clutch applications.
  • Requires use of Ford Racing Clutch Bolt Kit M-6397-A302 sold separately.
  • Made In USA
Ford Racing performance flywheels are high quality and precision machined.  Each one is designed for specific engine and clutch setups.  These flywheels go great with our Ford Racing built crate engines and production style offerings from Ford Racing.

Specific Features:
  • Strong Billet Steel for durability and safety
  • 157 Tooth (make sure you have a 157 tooth compatible starter)
  • 50 oz.-in. imbalance (for 50 oz-in externally balanced engines)
  • 6 Bolt setup for 6 Bolt crankshafts
  • Will fit 10.5" clutch applications.
  • Requires use of Ford Racing Clutch Bolt Kit M-6397-A302 sold separately.
  • Meets SFI 1.1 safety standards for use in racing events.
  • Made In USA
FORD RACING BILLET STEEL FLYWHEEL 4.6/5.4 6 BOLT, 164 TOOTH, NEUTRAL BALANCE -- M-6375-F46A FORD RACING LIGHTWEIGHT BILLET STEEL FLYWHEEL 4.6/5.4/COYOTE 5.0 8 BOLT, 164 TOOTH, NEUTRAL BALANCE -- M-6375-M50
Our Price:$289.95
more info
Our Price:$333.00
Free Shipping
more info
FORD RACING BILLET STEEL FLYWHEEL 4.6/5.4 6 BOLT, 164 TOOTH, NEUTRAL BALANCE -- M-6375-F46A FORD RACING LIGHTWEIGHT BILLET STEEL FLYWHEEL 4.6/5.4/COYOTE 5.0 8 BOLT, 164 TOOTH, NEUTRAL BALANCE -- M-6375-M50
Ford Racing performance flywheels are high quality and precision machined. Each one is designed for specific engine and clutch setups. These flywheels go great with our Ford Racing built crate engines and production style offerings from Ford Racing.

Specific Features:
  • Billet Steel for durability and safety
  • 164 Tooth (make sure you have a 164 tooth compatible starter)
  • Neutral Balanced (for internally balanced engines)
  • 6 Bolt setup for 6 Bolt crankshafts
  • Will fit either 10.5" or 11" clutch applications. Will not fit 2005-2010 Mustang production/stock pressure plate/clutch disc.
  • Designed for typical 6 bolt pressure plate bolt pattern
  • Requires use of Ford Racing Clutch Bolt Kit M-6397-B46 sold separately.
  • Meets SFI 1.1 safety standards for use in racing events.
  • Made In USA

FORD RACING LIGHTWEIGHT BILLET STEEL FLYWHEEL 4.6/5.4/COYOTE 5.0 8 BOLT, 164 TOOTH, NEUTRAL BALANCE

M-6375-M50


Ford Racing performance flywheels are high quality and precision machined. Each one is designed for specific engine and clutch setups. These flywheels go great with our Ford Racing built crate engines and production style offerings from Ford Racing.

Specific Features:
  • Billet Steel for durability and safety
  • Lightweight design weighs only 20 lbs.
  • 164 Tooth (make sure you have a 164 tooth compatible starter)
  • Neutral Balanced (for internally balanced engines)
  • 8 Bolt setup for 8 Bolt crankshafts
  • Will fit either 10.5" or 11" clutch applications. Will not fit 2005-2015 Mustang production/stock pressure plate/clutch disc.
  • 7.050" Clutch Damper assembly counter bore
  • Designed for both typical 6 bolt and 9 bolt pressure plate bolt patterns
  • Requires use of Ford Racing Clutch Bolt Kit M-6397-B46 sold separately.
  • Meets SFI 1.1 safety standards for use in racing events.
  • Made In USA
M-6375-D302B FORD RACING BILLET STEEL FLYWHEEL 289/302/351W 6 BOLT, 157 TOOTH, NEUTRAL BALANCE FORD RACING BILLET STEEL FLYWHEEL 4.6/5.4/COYOTE 5.0 8 BOLT, 164 TOOTH, NEUTRAL BALANCE -- M-6375-G46A
Our Price:$335.00
more info
Our Price:$405.00

(1)
more info
M-6375-D302B FORD RACING BILLET STEEL FLYWHEEL 289/302/351W 6 BOLT, 157 TOOTH, NEUTRAL BALANCE FORD RACING BILLET STEEL FLYWHEEL 4.6/5.4/COYOTE 5.0 8 BOLT, 164 TOOTH, NEUTRAL BALANCE -- M-6375-G46A
Ford Racing performance flywheels are high quality and precision machined. Each one is designed for specific engine and clutch setups. These flywheels go great with our Ford Racing built crate engines and production style offerings from Ford Racing.

Specific Features:
  • Strong Billet Steel for durability and safety
  • 157 Tooth (make sure you have a 157 tooth compatible starter)
  • Neutral Balanced (for internally balanced engines)
  • 6 Bolt setup for 6 Bolt crankshafts
  • Will fit 10.5" clutch applications.
  • Requires use of Ford Racing Clutch Bolt Kit M-6397-A302 sold separately.
  • Meets SFI 1.1 safety standards for use in racing events.
  • Made In USA
Ford Racing performance flywheels are high quality and precision machined. Each one is designed for specific engine and clutch setups. These flywheels go great with our Ford Racing built crate engines and production style offerings from Ford Racing.

Specific Features:
  • Billet Steel for durability and safety
  • 164 Tooth (make sure you have a 164 tooth compatible starter)
  • Neutral Balanced (for internally balanced engines)
  • 8 Bolt setup for 8 Bolt crankshafts
  • Will fit either 10.5" or 11" clutch applications. Will not fit 2005-2010 Mustang production/stock pressure plate/clutch disc.
  • Designed for typical 6 bolt pressure plate bolt pattern
  • Requires use of Ford Racing Clutch Bolt Kit M-6397-B46 sold separately.
  • Meets SFI 1.1 safety standards for use in racing events.
  • Made In USA
Tilton Hydraulic Throwout Bearing for Tremec and Toploader Transmissions -- 60-6102
Our Price:$449.95
Free Shipping
(3)
more info
Tilton Hydraulic Throwout Bearing for Tremec and Toploader Transmissions -- 60-6102
6000-Series Hydraulic Release Bearing features Tilton race-proven reliability for the street! These hydraulic release bearing have been designed for ease of installation and maximum reliability, at a very competitive price. 6000-Series hydraulic release bearings feature a stainless steel threaded bearing retainer-mount sleeve that offers nearly 1.25" of adjustability.

Mount:
Transmission
Body and Piston Material:
Billet Aluminum
Piston Area:
1.221 in2
Piston Travel:
0.700"
Ports:AN-4 (1/4"-28) hose
Included in kit:
Steel braided supply line, bleed line and fittings, stainless steel threaded adjustment sleeve, anti-rotation bolt and special bearing retainer bolt.
   
 
Ford Racing By Speedshop Direct.com
A Subsidiary of
Autocars/Speedshop Direct

3212 El Camino Real Atascadero, CA 93422
 About Us
 Privacy Policy
 Send Us Feedback