Quick search box

Search by vehicle

Search by product

Quick links

FEDERAL TRADE COMMISSION
VEHICLE WARRANTY CONSUMER ALERT
CLICK HERE FOR MORE INFORMATION

(Your shopping cart is empty)

You are here: Home > Wheels

GENUINE FORD RACING WHEELS

"PUT A FORD ON YOUR FORD"

FRPP uses the Society of Automotive Engineers (SAE) and American Society for Testing and Materials (ASTM) standards: SAE J175 and J328 for impact and fatigue testing and ASTM B368 for chrome testing. These standards define a series of tests that ensure the safety and finish of a wheel.

THESE TESTS ARE THE MINIMUM STANDARD USED TO DEFINE THE ENDURANCE OF FRPP WHEELS.

IMPACT TESTING This test simulates a curb impact on the side of a tire/wheel assembly. During testing, a tire/wheel assembly is mounted at a 13-degree angle to a test fixture by the hub. A weight is dropped from 9 inches onto the assembly at the tire/wheel intersection. The mass of the weight is determined by a formula, using the vehicle weight.

DYNAMIC CORNERING FATIGUE TESTING

This test simulates lateral loads applied to a wheel by the vehicle. During testing, a wheel is clamped to a fixture by the front face and a constant bending moment is applied through the hub. A wheel of new design will run a minimum of 1,000,000 cycles before approved. The load applied is determined by a formula, using the vehicle weight.

DYNAMIC RADIAL FATIGUE TESTING

This test simulates axial loads applied to a wheel by the vehicle. During testing, a tire/wheel assembly is mounted to an axle by the hub. A large drum drives the assembly while a load is applied perpendicular to the tire patch. A wheel of new design will run a minimum of 5,000,000 cycles. The load applied is determined by a formula, using the vehicle weight.

CHROME QUALITY TESTING

Copper-accelerated acetic acid-salt spray, commonly known as CASS testing, is the standard method used to test the corrosive performance of copper/nickel/chromium-plated wheels. The test is performed in a sealed chamber with a highly acetic spray directed onto the wheel for a predetermined amount of time, usually 66 hours.

Sort By

Page of 1

FORD RACING WHEEL NUTS (5 PACK) -- M-1012-G

2015-2017 MUSTANG I4 PERFORMANCE PACK WHEEL SPARKLE SILVER 19X9 -- M-1007-M199SA

Our Price:$12.00

(2)

List Price:$169.00

Our Price:$134.00

You save $35.00!

Service replacement for the Mustang FR500S and BOSS 302S race car.
1/2"-20 thread plated steel cone seat lug nuts
Open-ended for use with long wheelstuds
13/16" hex
Fits 2005-2013 Mustang and most other 1/2"-20 applications

Fits 2015-2017 Mustang
Same styling as 2015 Mustang Eco Boost I4 Performance Pack with unique Ford Performance paint finish
Fits with Performance Pack 6-piston brake kit
19" x 9" wide
5 lug, 114mm (4.5") bolt circle
45 mm offset
172mm backspacing
Sparkle Silver Paint Finish
Clear coated to OEM standards
Includes Mustang center cap
Valve Stem TPMS Compatible
Use with M-1180-B TPMS Sensor and Tool kit

FORD RACING MUSTANG MATTE BLACK WHEEL 18" x 8 " -- M-1007-P188MB

2012-2014 FOCUS ST WHEEL 18" GLOSS BLACK -- M-1007-M188GB

Our Price:$169.95

Our Price:$229.00

Fits 2005-2014 Mustang GT and 2005-2014 Mustang V6
18" x 8" wide
5-lug 4.5" bolt circle
40mm offset
6.25-inch backspacing
Mesh spoke design
Cast aluminum with matte black paint finish
Vehicles with Ford Racing or OEM Brembo Brake option MUST use 1 inch wheel spacers for proper caliper clearance.
Includes Ford Racing center cap
Band and valve stem TPMS compatible. Does not include TPMS sensors.
TPMS Sensors and Activation Tool sold separately

2012-2014 Ford Focus
Same wheel as the Focus ST cast aluminum wheel but has a gloss black finish and clearcoat
Ford Racing does not offer the OEM Focus ST wheel, only the one in the gloss black finish.
18" x 8" wide
5-lug, 108mm bolt circle
Includes Ford blue oval center cap
Valve Stem TPMS compatible

2010-2013 MUSTANG 2010-2012 GT500 TPMS SENSORS AND ACTIVATION TOOL KIT -- M-1180-A

2015-2017 F-150 20" X 8.5" SIX SPOKE WHEEL - MATTE BLACK -- M-1007-P2085MB

List Price:$399.00

Our Price:$269.00

You save $130.00!

(1)

List Price:$310.00

Our Price:$275.00

You save $35.00!

Fits 2010-2013 Mustang V6 and Mustang GT
Fits 2010-2012 Shelby GT500
Kit contains 4-valve mounted snap-in tire pressure monitor sensors and tire pressure monitor activation tool
2010-2013 Mustang requires that tire pressure monitor sensors are installed and
properly activated. Failure to install and activate sensors will cause tire pressure monitor light to remain on
Activation tool can be used to retrain sensors after tire rotation
Warning: Requires wheels specifically designed for valve-mounted snap-in-tire pressure monitor sensors

Note : Will NOT work on 2007-2009 Mustang V6, GT or GT500. Valve stems are not designed for speeds over 155 mph

Fits 2015-2017 F-150
Matte Black paint finish, clear coated to OEM standards
Includes Blue Ford Oval Center Cap
Valve Stem TPMS Compatible
20" x 8.5" wide
6 lug, 135 mm bolt circle
12.5 mm offset
164.5 backspacing

2015-2017 MUSTANG GT PERFORMANCE PACK REAR WHEEL MATTE BLACK 19X9.5 -- M-1007-M1995B

2015-2016 MUSTANG GT PERFORMANCE PACK WHEEL SATIN BLACK 19X9 -- M-1007-M199B

List Price:$299.00

Our Price:$299.00

List Price:$329.00

Our Price:$299.00

You save $30.00!

Fits 2015-2017 Mustang
Same styling as 2015-2017 Mustang GT Performance Pack with unique Ford Performance paint finish
Fits with Performance Pack 6-piston brake kit
19" x 9.5" wide
5 lug, 114mm (4.5") bolt circle
52.5 mm offset
186mm backspacing
Matte Black Paint Finish
Clear coated to OEM standards
Includes Ford Performance center cap
Valve Stem TPMS Compatible
See M-1007-M199B for 9" wide version
Use with M-1180-B TPMS Sensor and Tool kit

Fits 2015-2016 Mustang
Same styling as 2015 Mustang GT Performance Pack with unique Ford Performance paint finish
Fits with Performance Pack 6-piston brake kit
19" x 9" wide
5 lug, 114mm (4.5") bolt circle
45 mm offset
172 mm backspacing
Satin Black Paint Finish
Clear coated to OEM standards
Includes Mustang center cap
Valve Stem TPMS Compatible
See M-1007-M1995B for 9.5" wide version
Use with M-1180-B TPMS Sensor and Tool kit

M-1007-R198GB Ford Performance Mk3 Focus RS Wheel 19X8 - Gloss Black

FORD RACING MUSTANG BOSS 302S FRONT WHEEL BLACK WITH MACHINED FACE -- M-1007-DC199LGB

Our Price:$379.00
Sold in Units of Each (1)

(1)

Our Price:$600.00

(1)

Ford Performance Mk3 Focus RS Wheel 19 X 8 - Gloss Black

M-1007-R198GB

Fits 2013-2017 Focus ST
Fits 2016-2017 Mk3 Focus RS
Fits 2012-2017 Focus Hatch Back
19" x 8" wide
Gloss Black paint finished to OEM Standards
Valve Stem TPMS Compatible
5-lug. 108mm bolt circle
50 mm offset
160 mm backspacing
Includes Ford Performance RS Center Cap M-1096-RS
RS logo casting on wheel lip
Great wheel upgrade for Focus ST customers with the Focus RS Brembo brake upgrade kits
Made in Germany by Ronal for Ford Performance

2005-2014 Mustang GT, 2007-2014 Shelby GT500 and 2005-2014 Mustang V6
Standard equipment on Ford Racing Mustang Boss 302S factory-built race car M-FR500-B302S
19" x 9" wide
5-lug, 4.5" bolt circle
42 mm offset
6.7" backspacing
Machined face with gloss black accents
Clear coated to OEM standards
Includes Mustang Bar and Pony center cap M-1096-A
Clears OEM Brembo brakes and M-2300-S and M-2300-T Brake Kit
Valve stem TPMS compatible

M-1007KIT-DC199LGB Mustang Boss 302S 19X9 Wheel Set With TPMS Sensor Kit

2015-2018 Mustang 19X9 & 19X9.5 Performance Pack Wheel Set With TPMS Kit - Matte Black -- M-1007K-M19XB

Our Price:$999.95

(3)

List Price:$1,420.00

Our Price:$1,165.00

You save $255.00!

2005-2014 Mustang GT, 2007-2014 Shelby GT500 and 2005-2014 Mustang V6
WHEELS WILL FIT 2013-2014 SHELBY GT500.
Note: Included TPMS valve stems are not compatible with 2013-2014 GT500.
Includes four wheels and M-1180-A Mustang TPMS Sensor and Activation Tool
Standard equipment on Ford Racing Mustang Boss 302S factory-built race car M-FR500-B302S
19" x 9" wide
5-lug, 4.5" bolt circle
42 mm offset
6.7" backspacing
Machined face with gloss black accents
Clear coated to OEM standards
Includes Mustang Bar and Pony center cap M-1096-A
Clears OEM Brembo brakes Shelby GT500 and 2011+ Mustang GT/Boss 302 and the Ford Racing M-2300-S Brembo Brake Kit.
Valve Stem TPMS Sensors are not compatible with Band Style TPMS systems. While the wheels will fit, Band Style TPMS vehicles will still trigger a TPMS dash light unless Band Style TPMS sensors are used.

2015-2018 Mustang 19X9 & 19X9.5 Performance Pack Wheel Set With TPMS Kit - Matte Black

M-1007K-M19XB

Fits 2015-2018 Mustang
Production Mustang Performance Pack wheels with a matte black paint finish.
Brand new genuine Ford wheels and TPMS sensor kit. Not aftermarket replicas.
Clears the Ford Performance Brembo 6 Piston Performance Pack Brake Upgrade Kit -- M-2300-V
Matte Black paint finish, clear-coated to OEM standards
Includes 19" x 9.5" M-1007-M1995B rear wheels and 19" x 9" M-1007-M199B front wheels
Includes Ford Performance Center Cap M-1096-FP3
Includes M-1180-B sensor and activation tool kit
5-lug 114mm (4.5") bolt circle
52.5 mm offset on 19" x 9.5" wheel and 45 mm offset on 19" x 9" wheel
186 mm backspacing on 19" x 9.5" wheel and 172 mm backspacing on 19" x 9" wheel