Acceptance Mark

(Your shopping cart is empty)

  Home > Crate Engines > Big Block Engines >

M-6007-572DF Ford Performance 572 Cubic Inch 655HP Big Block Front Sump Street Crate Engine

M-6007-572DF Ford Performance 572 Cubic Inch 655HP Big Block Front Sump Street Crate Engine
Water pump not pictured. Engine photo and specs may vary.

Click here for Ford Racing OEM Limited Warranty Details
Our Price:$19,750.00

Part Number: M-6007-572DF


Ford Performance 572 Cubic Inch 655HP Big Block Front Sump Street Crate Engine



This 572 cubic inch big block crate engine makes impressive power with excellent driveability while utilizing premium, unleaded pump gas.

655 Horsepower @ 5500 rpm

710 lb.-ft. torque @ 4500 rpm

  • Power: 655HP @ 5,500 rpm
  • Torque: 710 Lb-ft @ 4,500 rpm
  • Engine type: 385 Series 429/460 Big Block
  • Displacement: 572 Cubic Inches
  • Bore x Stroke: 4.500 inch bore x 4.500 inch stroke
  • Engine block: Ford Performance Siamese Bore Performnance 460 Block M-6010-A460
    • High strength block for professional competition
    • Siamese cylinder bore design for increased cylinder wall thickness
    • 10.322 inch deck height
    • Cast iron block
    • 4 bolt main caps on journals 2, 3, and 4.
    • Nodular iron main caps
    • Priority main oiling system design
    • Wet sump oiling design
    • Can be bored/stroked to produce 598 cubic inches
  • Crankshaft: SCAT forged steel
  • Connecting rods: SCAT forged steel H-beam connecting rods and ARP bolts
  • Pistons: Diamond with floating wrist pins
  • Camshaft type: Hydraulic roller
  • Lifters: Hydraulic roller lifters
  • Camshaft lift: 0.649 inch
  • Camshaft duration:
    • Intake: 259 degrees @ 0.050 inch lift
    • Exhaust: 263 degrees @ 0.050 inch lift
  • Cylinder heads: Ford Performance Super Cobra Jet aluminum cylinder heads M-6049-SCJA
    • Valve springs: Dual springs
    • Valve angles and locations designed to reduce cylinder wall shrouding and improve flow.
    • Combustion chambers designed to accommodate the centrally located valves.
    • Stainless steel 2.20 inch intake valve
    • Stainless steel 1.76 inch exhaust valve
    • 72cc combustion chambers
    • 290cc intake runner
    • 148cc exhaust runner
    • Machined 7-degree locks
    • Steel valve spring retainers
    • Premium valve seals
  • Compression ratio: 10.0:1 (nominal)
  • Rocker arms: Crower stainless steel roller rocker arms
  • Timing chain: Multi-index roller timing chain set
  • Oil pump: Jon Kaase heavy duty aluminum oil pump
  • Vibration damper: Ford Performance SFI approved high performance M-6316-A521
  • Valve covers: Ford Performance aluminum valve covers M-6582-B460
  • Oil pan: High performance front sump oil pan
  • Intake manifold: Aluminum Edeblrock Victor single plane 2966
  • Carburetor: Holley Street Avenger 870 CFM carburetor
  • Distributor: MSD Distributor
  • Water pump: Aluminum Edelbrock
  • Spark plug wires: Ford Racing 9mm spark plug wires
  • Required fuel: Premium Unleaded
  • Exhaust gasket required: Fel-Pro 1420
  • Built with current available parts. Engine photo and specs may vary.

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Crate Engines > Big Block Engines
Project Car
Mustang > Vintage Mustang Parts > Crate Engines
Hot Rod and Kit Car > Crate Engines
Ford Racing By Speedshop
A Subsidiary of
Autocars/Speedshop Direct

3212 El Camino Real Atascadero, CA 93422
 About Us
 Privacy Policy
 Send Us Feedback