Ford Performance 572 Cubic Inch 655HP Big Block Front Sump Street Crate Engine

M-6007-572DF

The BIG BLOCK is BACK!

This 572 cubic inch big block crate engine makes impressive power with excellent driveability while utilizing premium, unleaded pump gas.

655 Horsepower @ 5500 rpm

710 lb.-ft. torque @ 4500 rpm

• Power: 655HP @ 5,500 rpm
• Torque: 710 Lb-ft @ 4,500 rpm
• Engine type: 385 Series 429/460 Big Block
• Displacement: 572 Cubic Inches
• Bore x Stroke: 4.500 inch bore x 4.500 inch stroke
• Engine block: Ford Performance Siamese Bore Performnance 460 Block M-6010-A460
  • High strength block for professional competition
  • Siamese cylinder bore design for increased cylinder wall thickness
  • 10.322 inch deck height
  • Cast iron block
  • 4 bolt main caps on journals 2, 3, and 4.
  • Nodular iron main caps
  • Priority main oiling system design
  • Wet sump oiling design
  • Can be bored/stroked to produce 598 cubic inches
• Crankshaft: SCAT forged steel
• Connecting rods: SCAT forged steel H-beam connecting rods and ARP bolts
• Pistons: Diamond with floating wrist pins
• Camshaft type: Hydraulic roller
• Lifters: Hydraulic roller lifters
• Camshaft lift: 0.649 inch
• Camshaft duration:
  • Intake: 259 degrees @ 0.050 inch lift
  • Exhaust: 263 degrees @ 0.050 inch lift
• Cylinder heads: Ford Performance Super Cobra Jet aluminum cylinder heads M-6049-SCJA
  • Valve springs: Dual springs
  • Valve angles and locations designed to reduce cylinder wall shrouding and improve flow.
  • Combustion chambers designed to accommodate the centrally located valves.
  • Stainless steel 2.20 inch intake valve
  • Stainless steel 1.76 inch exhaust valve
  • 72cc combustion chambers
  • 290cc intake runner
  • 148cc exhaust runner
  • Machined 7-degree locks
  • Steel valve spring retainers
  • Premium valve seals
• Compression ratio: 10.0:1 (nominal)
• Rocker arms: Crower stainless steel roller rocker arms
• Timing chain: Multi-index roller timing chain set
• Oil pump: Jon Kaase heavy duty aluminum oil pump
• Vibration damper: Ford Performance SFI approved high performance M-6316-A521
• Valve covers: Ford Performance aluminum valve covers M-6582-B460
• Oil pan: High performance front sump oil pan
• Intake manifold: Aluminum Edeblrock Victor single plane 2966
• Carburetor: Holley Street Avenger 870 CFM carburetor
• Distributor: MSD Distributor
• Water pump: Aluminum Edelbrock
• Spark plug wires: Ford Racing 9mm spark plug wires
• Required fuel: Premium Unleaded
• Exhaust gasket required: Fel-Pro 1420
• Built with current available parts. Engine photo and specs may vary.